Related Questions

Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
A Strain
B Stress
C Pressure
D Modulus of elasticity
A fluid is termed as the Newtonion fluid, when the shear stress is __________ the velocity gradient.
A Independent of
B Inversely proportional to
C Directly proportional to
D None of these
For turbulent flow of newtonion fluid in a circular cross-section pipe, the ratio of maximum to average fluid velocity is
A 0.5
B 1
C 0.66
The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonion fluid in a circular pipe is
A 0.5
B 1
C 2
D 0.66
If ‘A’ is the sectional area of a pre-stressed rectangular beam provided with a tendon pre-stressed by a force ‘P’ through its centroidal longitudinal axis, the compressive stress in concrete, is
A $$\frac{{\text{P}}}{{\text{A}}}$$
B $$\frac{{\text{A}}}{{\text{P}}}$$
C $$\frac{{\text{P}}}{{2{\text{A}}}}$$
D $$\frac{{2{\text{A}}}}{{\text{P}}}$$
‘P’ is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is ‘A’ and sectional modulus is ‘Z’. The minimum stress ‘f’ on the beam subjected to a maximum bending moment ‘M’ is
A $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{Z}}}{{\text{M}}}$$
B $${\text{f}} = \frac{{\text{A}}}{{\text{P}}} - \frac{{\text{M}}}{{\text{Z}}}$$
C $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{\text{Z}}}$$
D $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{6{\text{Z}}}}$$
‘P’ is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is ‘A’ and sectional modulus is ‘Z’. The maximum stress ‘f’ in the beam, subjected to a maximum bending moment ‘M’, is
A $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{Z}}}{{\text{M}}}$$
B $${\text{f}} = \frac{{\text{A}}}{{\text{P}}} - \frac{{\text{M}}}{{\text{Z}}}$$
C $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{\text{Z}}}$$
D $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{6{\text{Z}}}}$$
In a class of 60 students, 20 students like Math, 25 students like English and 30 students like Science. If 5 Students like both Math and Science, 8 Students like both English and Science and 3 students like neither of these subjects, how many students like all of the three subjects?
A 2
B 3
C 4
D 5
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
A Working
B Damaging
C Allowable
D None of these
Laminar flow of a Newtonion fluid ceases to exist, when the Reynolds number exceeds
A 4000
B 2100
C 1500
D 3000

Next steps