Related Questions

In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant?
A Rotational
B Unsteady
C Turbulent
D Non-uniform
Sohana's mathematics test had 75 problems i.e. 10 arithmetic, 30 algebra and 35 geometry problems each carrying I mark She answered 70% of the arithmetic, 40% of the algebra and 60% of the geometry problems correctly. She did not pass the test as she got less than 60% marks. How many more questions she would have needed to answer correctly to earn a 60% passing grade?
A 5
B 10
C 15
D 20
Which of the following equation must be perfunctorily satisfied while dealing with fluid flow problems?
A Newton’s third law
B Law of conservation of momentum
C Continuity equation
D Newton’s second law
For the laminar flow of a fluid in a circular pipe of radius R, the Hagen-Poisseule equation predicts the volumetric flow rate to be proportional to
A R
B R2
C R4
D R0.5
When the load on the engine increases, it becomes necessary to increase the supply of working fluid and when the load decreases, less working fluid is required. The supply of the working fluid to the engine is controlled by a
A D-slide valve
B governor
C Meyer’s expansion valve
D flywheel
If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be
A Higher than the surface of liquid
B The same as the surface of liquid
C Lower than the surface of liquid
D Unpredictable
The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid.
A Newtonion
B Dilatant
C Pseudo-plastic
D Non-Newtonion
The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop fo __________ fluid.
A Dilatant
B Pseudo-plastic
C Bingham plastic
D Newtonion
The fluid velocity varies as the cube of the cylinderical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid.
A Newtonion
B Pseudoplastic
C Dilatent
D Bingham plastic
In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid.
A Equal to
B More than
C Less than
D Either more or less than (depending upon the fluid)

Next steps