Related Questions

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process.
A 100
B 200-300
C 1000-10000
D 10
Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil
A Gives higher yield of petrol
B Lower octane number of petrol
C Higher sulphur content in the product
D Higher gum forming material in petrol
Overall rate of reaction in a heterogenous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it does not entail a chain mechanism.
A Proportional to
B Independent of
C Inversely proportional to
D Proportional to the square of
__________ catalytic reaction is involved in the thermal cracking of gas oil.
A Homogeneous
B Homogeneous non
C Heterogeneous
D Heterogeneous non
Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the
A Activation energy
B Equilibrium constant
C Heat of reaction
D None of these
Thermofer catalytic cracking process is a __________ process.
A Fixed bed
B Moving bed
C Fluidised bed
D Non-catalytic
For the non catalytic reaction of particles with surrounding fluid, the same needed to achive the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance.
A Film diffusion
B Diffusion through ash layer
C Chemical reaction
D Either A, B or C
For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance.
A Film diffusion
B Diffusion through ash layer
C Chemical reaction
D Either A, B or C
__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction.
A Gas film diffusion
B Ash diffusion
C Chemical reaction
D None of these
Brass parts with high residual tensile stress at the surface are susceptible to season cracking (i.e. spontaneous cracking occuring on exposure to atmospheric corrosion), if its zinc percentage is more than
A 5
B 10
C 20
D 35

Next steps