Related Questions

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as
A Troweling
B Laying
C Grouting
D Placing
The frog of the brick in a brick masonry is generally kept on
A Bottom face
B Top face
C Shorter side
D Longer side
The solid brick shown is made of small square shaped bricks of side 1. when the large brick is disassembled into its component small bricks. the total surface area of all the small bricks is how much greater than the surface area of the large brick?
A 32
B 40
C 60
D 72
The expected out turn of half brick partition wall per mason per day is
A 1.5 m2
B 2.0 m2
C 4.0 m2
D 5.0 m2
Brick nogging type of partition wall, is constructed by
A Laying bricks as stretchers in cement mortar
B Laying bricks as headers in cement mortar
C Reinforcing brick wall with iron straps
D Constructing brick work within a wooden framework
A ladder is resting against a vertical wall and its bottom is 2.5 m away from the wall. If it slips 0.8 m down the wall, then its bottom will move away from the wall by 1.4 m. What is the length of the ladder?
A 6.2 m
B 6.5 m
C 6.8 m
D \7.5 m
Generally, no corrosion allowance in wall thickness of a part is required, if the thickness is more than __________ mm.
A 10
B 20
C 30
D 5
The nominal thickness of an expansion joint in brick walls, is kept more than
A 5 mm
B 10 mm
C 15 mm
D 20 mm
The nominal thickness of one brick wall in mm, is
A 90 mm
B 150 mm
C 190 mm
D 200 mm
The stretcher bond in brick masonry can be used only when the thickness of wall is
A 90 mm
B 180 mm
C 190 mm
D 280 mm

Next steps