Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Below are given two sets, Set - I which gives modalities of operant conditioning and Set - II which provides the types of reinforcement, the types of responses (responses made or withheld) and the presence or absence of cue. Match the two sets and indicate your answer by choosing from the code : Set - I (Modalities of operant conditioning procedures) Set – II           (Conditions and contexts) (a) Reward training (i) Positive reinforcement, response made, with cue present (b) Escape training (ii) Positive reinforcement, response withheld with cue absent (c) Discriminated omission training   (iii) Positive reinforcement, response made with cue absent (d) Active avoidance   (iv) Negative reinforcement, response made with training (e) Punishment training (v) Positive reinforcement, response withheld with cue present   (vi) Negative reinforcement, response withheld with cue absent  
The ultimate shear force at a section of an RCC beam is 300 kN. The shear resisted by concrete is 77.5 kN. What is the shear for which shear reinforcement is required?
Nominal cover to reinforcement is provided to 1. protect reinforcement against corrosion. 2. provide share resistance. 3. protect reinforcement against fire. 4. develop sufficient bond strength along surface area of reinforcement bars. Which of the above statements are correct?
If nominal shear stress $${\tau _{\text{v}}}$$ exceeds the design shear strength of concrete $${\tau _{\text{c}}}$$, the nominal shear reinforcement as per IS : 456-1978 shall be provided for carrying a shear stress equal to
Given below are two Lists in which List I indicates the type of operant learning procedures while List II describes their related procedure-paradigm. Match the pairs and choose the correct answer from the code given below. List I (Type of Operant Learning Procedure) List II (Related Procedure) a)  Discriminated Omission i)  Cue Present → Response Made → Positive Reinforcement b)  Discriminated Punishment ii)  Cue Present → Response Made → Negative Reinforcement c)  Discriminated Operant iii)  Cue Present → Response Withheld → Positive Reinforcement d)  Active Avoidance iv)  Cue Present → Response Withheld → Negative Reinforcement
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
As per IS 800 ∶ 2007, in the design of beams/plate girders, when the web of a member acting alone is inadequate, different types of stiffeners are provided. Match the type of stiffeners provided in List I with the requirement to be satisfied by them in List 2. (Use the Code in the lists for matching). List 1 List 2 B. Intermediate transverse web stiffener 1. Provide local reinforcement to web under shear and bearing. C. Load carrying stiffener 2. Improve the buckling strength of a slender web due to shear. D. Bearing stiffener 3. Prevent local buckling of web due to concentrated loading. E. Diagonal stiffener 4. Prevent local crushing of web due to concentrated loading
When the shear force due to ultimate loads is less than 0.5 times shear force of concrete then shear reinforcement is?
Lateral ties in RCC columns are provided to resist
According to IS : 456 – 2000, side face reinforcement is provided in RCC beams, when depth of beam exceeds