Related Questions

If a purple fabric is on rack three and a brown fabric is on rack four , the green fabric must be on which of the following racks?
A Two
B Five
C Six
D Seven
Ten fabrics of different colors are displayed on ten racks in a cloth store. The racks are placed one after another and numbered consecutively from one to ten. Each rack contains fabric of a single color. One fabric is green , two fabrics are brown , three fabrics are purple and remaining four fabrics are red. If a purple fabric is on rack two and red fabrics are on racks three and four , the green fabric must be on which of the following racks?
A Five
B Six
C Seven
D Eight
A worm gear is used as the pinion for the rack and pinion type of steering gearbox, because it
A Improves steering comfort when steering wheel is turned to effect small changes in the direction of forward motion
B Allows the steering wheel to be turned by a greater amount when steering
C Makes the steering more responsive
D Reduces the amount of kickback for large steering angles
The Ackerman steering gear mechanism is preferred to the Davis steering gear mechanism, because
A whole of the mechanism in the Ackerman steering gear is on the back of the front wheels and (
B the Ackerman steering gear consists of turning pairs
C the Ackerman steering gear is most economical
D both (a) and (b)
The condition for correct steering of a Davis steering gear is (where $$\alpha = $$  Angle of inclination of the links to the vertical)
A $$\sin \alpha = \frac{{\text{b}}}{{\text{c}}}$$
B $$\cos \alpha = \frac{{\text{c}}}{{\text{b}}}$$
C $$\tan \alpha = \frac{{\text{c}}}{{2{\text{b}}}}$$
D $$\cot \alpha = \frac{{\text{c}}}{{2{\text{b}}}}$$
In a hydraulic power steering system, the power steering pump is driven by a
A Belt driven by camshaft
B Chain driven by crankshaft
C Belt driven by drive-shaft
D Belt driven by crankshaft
In vehicles with tilt steering, the steering column is pivoted in
A Upper bracket
B Lower bracket
C Tilt bracket
D Steering yoke joint
The component that is responsible for converting the rotation of the steering wheel into lateral motion is the
A Steering wheel
B Steering shaft
C Steering gearbox
D Steering linkages
Fugacity of a component in an ideal gas mixture is euqal to the partial pressure of that component in the mixture. The fugacity of each component in a stable homogeneous solution at contant pressure and temperature __________ as its mole fraction increases.
A Decreases
B Decreases exponentially
C Increases
D Remains constant
Relative volatility varies with the concentration of component for an ideal solution. The relative volatity of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when
A Only vapor phase follows Raoult's law
B Only liquid phase obeys Dalton's law
C Liquid phase obeys Dalton's law and vapor phase obeys Raoult's law
D Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Next steps