Related Questions

How many blocks away will Fred be from his starting p;ace if he travels two blocks north , then three blocks east, and then two blocks south?
A Four
B Two
C Three
D Zero
How many blocks away will Fred be from his starting place if he travels two blocks north, then three blocks east and then two blocks south?
A Four
B Two
C Three
D Zero
A bus picks up a group of tourists at a hotel. The sightseeing bus travels 2 blocks north, 2 blocks east. I block south, 2 blocks east, and 1 block south. Where is the bus in relation to the hotel?
A 2 blocks north
B 1 block west
C 3 blocks south
D 4 blocks east
The aluminium alloy is used in cylinder blocks because
A It is lighter and has good heat dissipation characteristics
B Material cost is low
C It does not require any cylinder liners
D The piston is also made of aluminium alloy
Liners of a ball mill are never made of
A Lead
B Alloy steel
C Rubber or ceramic material
D Cast iron
Liners of bags are usually made of
A Polythene
B PVC
C Polypropylene
D Polyesters
In a band and block brake, the ratio of tensions on tight side and slack side of the band is (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the center of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = \mu \theta {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
In a band and block brake, the ratio of tensions on the tight and slack sides of band is given by (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the centre of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_{\text{2}}}}} = \mu \theta \times {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.
A Block vaults
B Block libraries
C Block books
D Block references
The height of a cylinder is four times the radius of the cylinder. If the volume of the cylinder is 256 cm², what is the radius of the cylinder.
A 4 cm
B 8 cm
C 16 cm
D 24 cm

Next steps