Related Questions

Two shafts A and B are made of the same material. The diameter of shaft A is twice as that of shaft B. The power transmitted by the shaft A will be __________ of shaft B.
A Twice
B Four times
C Eight times
D Sixteen times
A car averages 25 miles per gallon of gasoline when driven in the city and 40 miles per gallon when driven on the highway. According to these rates, which of the following is closest to the number of miles per gallon that the car averages when it is driven 10 miles in the city and then 50 miles on the highway?
A 64
B 36
C 12
D 29
A car averages 25 miles per gallon of gasoline when driven in the city and 40 miles per gallon when driven on the highway. According to these rates, which of the following is closest to the number of miles per gallon that the car average when it is driven 10 miles in the city and then 60 miles on the highway?
A 64
B 36
C 12
D 29
The Token-Ring architecture was developed for a more efficient way to determine who should be transmitting at any one time. With Ethernet, collisions may take place, causing the transmitting computers to have to retransmit their data. The use of token guarantees that only one computer can transmit at a time. What happens as the network increases in size? Choose the best answer
A An additional token is added for every 1,000 nodes
B The speed of the Token-Ring network must be 16Mbps if the number of nodes is greater then 500
C The network becomes less efficient
D After the number of nodes exceeds 550, the Multistation Access Unit must be replaced by the more powerful Hyperstation Unified Bandwidth device
E The network becomes more efficient
The natural frequency of free torsional vibrations of a shaft is equal to (where q = Torsional stiffness of the shaft and $$I$$ = Mass moment of inertia of the disc attached at the end of a shaft)
A $$2\pi \sqrt {\frac{{\text{q}}}{I}} $$
B $$2\pi \sqrt {{\text{q}}I} $$
C $$\frac{1}{{2\pi }}\sqrt {\frac{{\text{q}}}{I}} $$
D $$\frac{1}{{2\pi }}$$
The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft and $$\tan \varphi $$  = Coefficient of friction between the shaft and bearing)
A $${\text{r}}\sin \varphi $$
B $${\text{r}}\cos \varphi $$
C $${\text{r}}\tan \varphi $$
D $$\frac{{\text{r}}}{2}\cos \varphi $$
The product of the tangential force acting on the shaft and its distance from the axis of the shaft (i.e. radius of shaft) is known as
A Bending moment
B Twisting moment
C Torsional rigidity
D Flexural rigidity
A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is
A $$\frac{{\text{M}}}{{\text{T}}}$$
B $$\frac{{\text{T}}}{{\text{M}}}$$
C $$\frac{{2{\text{M}}}}{{\text{T}}}$$
D $$\frac{{2{\text{T}}}}{{\text{M}}}$$
A hollow shaft will transmit a __________ torque than a solid shaft of the same mass and same material.
A Smaller
B Greater
C Medium
D None of these
A car averages 25 miles per gallon of gasoline when driven in the city and 40 miles per gallon when drives on the highway. According to these rates, which of the following is closest to the number of miles per gallon that the car averages when it is driven 10 miles in the city and then 50 miles on the highway?
A 64
B 36
C 12
D 29

Next steps