Related Questions

In this type of projection, each of the axes has different ratios of foreshortening:
A Isometric
B Dimetric
C Trimetric
D Parallel
This is how axonometric, oblique and perspective sketches show objects:
A Orthographically
B Pictorially
C Obliquely
D Parallel
In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to _________.
A 0, 0
B 10, 10
C 20, 20
D 30, 30
A rectangular field of 200m by 120m has two roads running along its center, one along the length and the other along the width. If the width of the roads is 5m, what is the area covered by the two roads?
A 1575 sq.m.
B 1600 sq.m.
C 1550 sq.m.
D 400 sq.m.
In order to have a connecting rod equally strong in buckling about X-axis and Y-axis, the moment of inertia about X-axis should be __________ the moment of inertia about Y-axis.
A Equal to
B Twice
C Three times
D Four times
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)
A $$\sigma \left( {1 + \frac{{\text{b}}}{{2{\text{a}}}}} \right)$$
B $$\sigma \left( {1 + \frac{{2{\text{a}}}}{{\text{b}}}} \right)$$
C $$\sigma \left( {1 + \frac{{\text{b}}}{{3{\text{a}}}}} \right)$$
D $$\sigma \left( {1 + \frac{{3{\text{a}}}}{{\text{b}}}} \right)$$
If a third equal and similar charge is placed between two equal and similar charges, then this third charge will
A move out of the field of influence of the two charges
B remain in stable equilibrium
C not be in equilibrium
D be in unstable equilibrium
An Auto-CAD term that refers to a pre-drawn object which is stored in a drawing file and can be inserted into any other drawing file as needed is a __________.
A Block
B Brick
C Balloon
D None of the above
In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
A 0, 0 and 2, 9
B 0, 0 and 17, 11
C 0, 0 and 18, 24
D 0, 0 and 34, 24
Mr.khan invested an amount of TK. 13,900 divided into two different schemes A and B at a simple interest rate of 14% per annum and 11% per annum respectively. If the total amount of simple interest earned in 2 years be Tk. 3,508, what was the amount invested in Scheme B?
A TK. 6400
B TK. 6500
C TK. 7200
D TK. 7500

Next steps