Related Questions

When a body is subjected to direct tensile stresses ($${\sigma _{\text{x}}}$$ and $${\sigma _{\text{y}}}$$) in two mutually perpendicular directions, accompanied by a simple shear stress $${\tau _{{\text{xy}}}}{\text{,}}$$  then in Mohr's circle method, the circle radius is taken as
A $$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} + \tau $$
B $$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} + \tau $$
C $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
D $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
Which of the following text-decoration value specifies each line of text has a line above it?
A line
B underline
C overline
D blink
The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
A Visible
B Hidden
C Extension
D Dimension
A snapshot measures 5/2 inches by 15/8 inches. It is to be enlarged so that the longer dimension will be 4 inches. What will be the length of the enlarged shorter dimension then?
A 2 : 1
B 4 : 3
C 1 : 2
D 4 :2
The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.
A Linear
B Continue
C Baseline
D Quick Dimension
When a body is subjected to biaxial stress i.e. direct stresses ($${\sigma _{\text{x}}}$$) and ($${\sigma _{\text{y}}}$$) in two mutually perpendicular planes accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), then maximum shear stress is
A $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
B $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
C $$\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
D $$\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
The ________ dimension tool will place the length of an angled line.
A Aligned
B Angle
C Linear
D Radial
The dimension text size is determined by what the architect deems necessary in _________.
A Model space
B Paper space
C The Finished plot
D The PDF file
This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:
A Dimension line
B Extension line
C Leader
D Specification
This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
A Dimension line
B Extension line
C Arrowhead line
D Centerline

Next steps