Related Questions

A Family Court may, if it so deems fit, hold the whole or any part of the proceedings under the Ordinance in camera, বিধানটি The Family Courts Ordinance, 1985 এর কত ধারায় বর্ণিত হয়েছে?
A ১০
B ১১
C ১২
D ১৩
When a body is subjected to direct tensile stresses ($${\sigma _{\text{x}}}$$ and $${\sigma _{\text{y}}}$$) in two mutually perpendicular directions, accompanied by a simple shear stress $${\tau _{{\text{xy}}}}{\text{,}}$$  then in Mohr's circle method, the circle radius is taken as
A $$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} + \tau $$
B $$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} + \tau $$
C $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
D $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
A snapshot measures 5/2 inches by 15/8 inches. It is to be enlarged so that the longer dimension will be 4 inches. What will be the length of the enlarged shorter dimension then?
A 2 : 1
B 4 : 3
C 1 : 2
D 4 :2
This is the theoretically exact size from which limits of size are determined:
A Actual Size
B Dimensioned size
C Production size
D Basic size
When a body is subjected to biaxial stress i.e. direct stresses ($${\sigma _{\text{x}}}$$) and ($${\sigma _{\text{y}}}$$) in two mutually perpendicular planes accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), then maximum shear stress is
A $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
B $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
C $$\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
D $$\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
An architect often relies on a _________ to complete the set of technical drawings used in the design of an office building.
A Technical illustrator
B Artist
C Drafter
D Construction superintendent
Dimension text is generally placed above the ________ line.
A Dimension
B Extension
C Center
D Leader
Who is known as the architect of economic reforms in India ?
A Jyoti
B Jawaharlal Nehru
C Bajpayee
D Monmohon Singh
The Architect of ' Shaheed Minar ' is
A Hamidur Rahman
B Mainul Hossain
C Munir Chowdhury
D Abul Fazal
Who was the architect of Jatiya Smriti Shoudho?
A Lui Kan
B Hamidur Rahman
C Sayed Moinul Islam
D Hamiduzzaman

Next steps