Bissoy.com
Doctors Medicines MCQs Q&A

In a prismatic member made of two materials so joined that they deform equally under axial stress, the unit stresses in two materials are

In a prismatic member made of two materials so joined that they deform equally under axial stress, the unit stresses in two materials are Correct Answer Proportional to their respective moduli of elasticity

Related Questions

Six persons - Akshay, Bobby, Celina, Dimple, Esha, and Faisal took up a job with XYZ Consultants in a week from Monday to Saturday. Each of them joined for different posts on different days. The posts were of-Clerk, Officer, Technician, Manager, Supervisor and Sales Executive though not in the same order. Faisal joined as a Manager on the first day. Bobby joined as a Supervisor but neither on Wednesday nor Friday. Dimple joined as a Technician on Thursday. The officer joined the firm on Wednesday. Esha joined as a clerk on Tuesday. Akshay joined as a Sales Executive. Who joined the firm on Wednesday?
The average age of a family having three members is 40 years. The smallest member of the family is 18 years old. The difference between the age of the oldest family member and the age of the second oldest family member is 6 more than the difference between the age of the second oldest member and age of youngest member of the family. Quantity I: 25 years hence, what will be the average of the age of smallest member and that of oldest member of the family? Quantity II: What is the age of the oldest member of the family?   
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
Which of the following statements regarding stress related factors is/are true and false?
1. Burnout Stress Syndrome (BOSS) is a debilirating psychological condition brought about by unrelieved work stress.
2. 'Good' and 'bad' stresses are also referred to as 'Distress' and 'Eustress' respectively.
3. It is natural and healthy to maintain optimal level of stress.
4. Rustout Stress Syndrome (ROSS) is indicative of stress overload.
5. Anxiety is a state of emotional tension characterised by Apprehension, fearfulness, and psychic pain.
Consider the following statements regarding stress in beam : 1. If a member is subjected to equal and opposite couples acting in the same longitudinal planes, the member is said to be in pure bending. 2. The internal stresses developed in the beam are known as flexural stresses. 3. There is an intermediate surface known as neutral surface, at which the stress is zero. 4. An axis obtained by intersection of the neutral surface and a cross-section is known as neutral axis. Which of the above statements are correct ? 
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
The given figure shows the Mohr's circle of stress for two unequal and like principal stresses (σx and σy) acting at a body across two mutually perpendicular planes. The normal stress on an oblique section making an angle θ with the minor principle plane is given by
Strength of Materials mcq question image
The given figure shows the Mohr's circle of stress for two unequal and like principal stresses (σx and σy) acting at a body across two mutually perpendicular planes. The resultant stress is given by
Strength of Materials mcq question image