Related Questions

In a compound steam engine, the first stage of expansion is carried out in a high pressure cylinder whereas the last expansion is completed in low pressure cylinder. The diameter of high pressure cylinder is _________ the low pressure cylinder.
A Equal to
B Less than
C More than
D None of these
The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
A Compressive stress
B Shear stress
C Bending stress
D Elastic modulus
Thin spherical shells subjected to internal pressure, develop __________ stresses.
A Radial
B Circumferential
C Both A & B
D Neither A nor B
The height of a cylinder is four times the radius of the cylinder. If the volume of the cylinder is 256 cm², what is the radius of the cylinder.
A 4 cm
B 8 cm
C 16 cm
D 24 cm
The ratio of circumferential stress to longitudinal stress in a thin cylinder subjected to an internal pressure is
A $$\frac{1}{2}$$
B 1
C 2
D 4
A thin spherical shell of internal diameter d is subjected to an internal pressure p. If $${\sigma _{\text{t}}}$$ is the tensile stress for the shell material, then thickness of shell is equal to
A $$\frac{{{\text{pd}}}}{{{\sigma _{\text{t}}}}}$$
B $$\frac{{{\text{pd}}}}{{2{\sigma _{\text{t}}}}}$$
C $$\frac{{{\text{pd}}}}{{3{\sigma _{\text{t}}}}}$$
D $$\frac{{{\text{pd}}}}{{4{\sigma _{\text{t}}}}}$$
A thin spherical shell of internal diameter d is subjected to an internal pressure p. If V is the storage capacity of shell, then its diameter will be
A $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^{\frac{1}{2}}}$$
B $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^{\frac{1}{3}}}$$
C $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^2}$$
D $${\left( {\frac{{6{\text{V}}}}{\pi }} \right)^3}$$
STP-তে একটি আদর্শ গ্যাসকে প্রথমে তার প্রাথমিক আয়তনের এক-তৃতীয়াংশে সংকুচিত করা হয়, এবং তারপর প্রসারিত হতে দেওয়া হয় যতক্ষণ না তার চাপ প্রাথমিক চাপের অর্ধেক হয়। উভয় প্রক্রিয়ায় গ্যাসের তাপমাত্রা স্থির থাকে। যদি গ্যাসের প্রাথমিক অভ্যন্তরীণ শক্তি । হয়ে থাকে তাহলে এর চূড়ান্ত অভ্যন্তরীণ শক্তি কত? (An ideal gas at STP is first compressed to one-third of its initial volume and then allowed to expand until its pressure is half the initial pressure. The temperature of the gas remains constant during both the processes. If the initial internal energy of the gas is U, what is its final internal energy?)
A U/3
B U/2
C U
D 2U/3
The area of the base of a cylinder is 100πm2. The volume of the cylinder is 900πm3. What is the height of the cylinder?
A 9m
B 10m
C 11m
D 12m
The area of the base of a cylinder is 100πm2. The volume of the cylinder is 900πm2. What is the height of the cylinder?
A 9m
B 10m
C 11m
D 12m

Next steps