Related Questions

A pulley and belt in a belt drive form a
A Cylindrical pair
B Turning pair
C Rolling pair
D Sliding pair
In a multiple V-belt drive, when a single belt is damaged, it is preferable to change the complete set to
A Reduce vibration
B Reduce slip
C Ensure uniform loading
D Ensure proper alignment
In a multiple V-belt drive, when a single belt is damaged, it is preferable to change the complete set in order to
A Reduce vibration
B Reduce slip
C Ensure uniform loading
D Ensure proper alignment
In V-belt drive, belt touches
A At bottom
B At sides only
C Both at bottom and sides
D Could touch anywhere
In a belt drive, if the pulley diameter is doubled keeping the tension and belt width constant, then it will be necessary to
A Increase the key length
B Increase the key depth
C Increase the key width
D Decrease the key length
In a belt drive, the pulley diameter is doubled, the belt tension and pulley width remaining same. The changes required in key will be
A Increase key length
B Increase key depth
C Increase key width
D Double all the dimensions
You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
A as a master
B as a secondary
C as a slave
D as a primary
E as auto-select
The power transmitted by a belt is maximum when the maximum tension in the belt is _________ of centrifugal tension.
A One-third
B Two-third
C Double
D Three times
The velocity of the belt for maximum power is (where m = Mass of the belt in kg per meter length)
A $$\frac{{\text{T}}}{3}$$
B $$\frac{{{\text{Tg}}}}{3}$$
C $$\sqrt {\frac{{\text{T}}}{{3{\text{m}}}}} $$
D $$\sqrt {\frac{{3{\text{m}}}}{{\text{T}}}} $$
Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is
A Nylon-66
B Teflon
C Polyester
D Bakelite

Next steps