Related Questions

The ultimate tensile stress for mild steel is __________ the ultimate compressive stress.
A Equal to
B Less than
C More than
D None of these
The ultimate tensile stress of mild steel compared to ultimate compressive stress is
A Same
B More
C Less
D Unpredictable
In a tensile test on mild steel specimen, the breaking stress as compared to ultimate tensile stress is
A More
B Less
C Same
D More/less depending on composition
The allowable tensile stress in structural mild steel plates for steel tank is assumed as
A 95.0 MPa on net area
B 105.5 MPa on net area
C 105.5 MPa on gross area
D 150.0 MPa on gross area
The tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, $$l$$ = Length of weld and $${\sigma _{\text{t}}}$$ = Allowable tensile stress for weld metal)
A $$0.5\,{\text{s}}l{\sigma _{\text{t}}}$$
B $${\text{s}}l{\sigma _{\text{t}}}$$
C $$\sqrt 2 \,{\text{s}}l{\sigma _{\text{t}}}$$
D $$2\,{\text{s}}l{\sigma _{\text{t}}}$$
The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is
A 1400 kg/cm2
B 190 kg/cm2
C 260 kg/cm2
D 230 kg/cm2
The ultimate strength in tension for steel is __________ times the ultimate strength in shear.
A 0.5
B 0.9
C 1.5
D 2.5
The yield point in fatigue loading compared to that in static loading is less. The ratio of ultimate tensile strength to endurance limit of a material subjected to fatigue loading is
A 0.5
B 1
C 1.5
D 2
For steel, the ultimate strength in shear as compared to ultimate strength in tension is
A $$\frac{1}{2}$$
B $$\frac{1}{3}$$
C $$\frac{1}{4}$$
D $$\frac{2}{3}$$
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.
A Working
B Damaging
C Allowable
D None of these

Next steps