Related Questions

The natural frequency of free transverse vibrations due to uniformly distributed load acting over a simply supported shaft is (where $$\delta {\text{S}}$$ = Static deflection of simply supported shaft due to uniformly distributed load)
A $$\frac{{0.4985}}{{\sqrt {\delta {\text{S}}} }}$$
B $$\frac{{0.5615}}{{\sqrt {\delta {\text{S}}} }}$$
C $$\frac{{0.571}}{{\sqrt {\delta {\text{S}}} }}$$
D $$\frac{{0.6253}}{{\sqrt {\delta {\text{S}}} }}$$
The natural frequency of free transverse vibrations due to a point load acting over a simply supported shaft is equal to (where $$\delta $$ = Static deflection of a simply supported shaft due to the point load)
A $$\frac{{0.4985}}{{\sqrt \delta }}$$
B $$\frac{{0.5615}}{{\sqrt \delta }}$$
C $$\frac{{0.571}}{{\sqrt \delta }}$$
D $$\frac{{0.6253}}{{\sqrt \delta }}$$
Two shafts A and B are made of the same material. The diameter of shaft A is twice as that of shaft B. The power transmitted by the shaft A will be __________ of shaft B.
A Twice
B Four times
C Eight times
D Sixteen times
The natural frequency of free torsional vibrations of a shaft is equal to (where q = Torsional stiffness of the shaft and $$I$$ = Mass moment of inertia of the disc attached at the end of a shaft)
A $$2\pi \sqrt {\frac{{\text{q}}}{I}} $$
B $$2\pi \sqrt {{\text{q}}I} $$
C $$\frac{1}{{2\pi }}\sqrt {\frac{{\text{q}}}{I}} $$
D $$\frac{1}{{2\pi }}$$
The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in
A transverse vibrations
B torsional vibrations
C longitudinal vibrations
D none of the mentioned
In ______ machines, the size of the shaft is decided by the critical speed which depends on the deflection of the shaft.
A small
B medium
C large
D any of the above
The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft and $$\tan \varphi $$  = Coefficient of friction between the shaft and bearing)
A $${\text{r}}\sin \varphi $$
B $${\text{r}}\cos \varphi $$
C $${\text{r}}\tan \varphi $$
D $$\frac{{\text{r}}}{2}\cos \varphi $$
The product of the tangential force acting on the shaft and its distance from the axis of the shaft (i.e. radius of shaft) is known as
A Bending moment
B Twisting moment
C Torsional rigidity
D Flexural rigidity
A policy taken with critical illness rider benefit is being assigned. Which type of assignment would suit the intended purpose because if the life insured is diagnosed with a critical illness, he only should receive the critical illness rider claim?
A Absolute assignment
B Conditional assignment
C Loan assignment
D Collateral assignment
At the nodal point in a shaft, the amplitude for torsional vibration will be
A Minimum
B Maximum
C Zero
D Infinity

Next steps