Related Questions

The natural frequency of free torsional vibrations of a shaft is equal to (where q = Torsional stiffness of the shaft and $$I$$ = Mass moment of inertia of the disc attached at the end of a shaft)
A $$2\pi \sqrt {\frac{{\text{q}}}{I}} $$
B $$2\pi \sqrt {{\text{q}}I} $$
C $$\frac{1}{{2\pi }}\sqrt {\frac{{\text{q}}}{I}} $$
D $$\frac{1}{{2\pi }}$$
Two shafts A and B are made of the same material. The diameter of shaft A is twice as that of shaft B. The power transmitted by the shaft A will be __________ of shaft B.
A Twice
B Four times
C Eight times
D Sixteen times
Overmodulation (amplitude) occurs when signal amplitude is ___________ carrier amplitude
A Equal to
B Greater than
C Less than
D None of the above
The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft and $$\tan \varphi $$  = Coefficient of friction between the shaft and bearing)
A $${\text{r}}\sin \varphi $$
B $${\text{r}}\cos \varphi $$
C $${\text{r}}\tan \varphi $$
D $$\frac{{\text{r}}}{2}\cos \varphi $$
The product of the tangential force acting on the shaft and its distance from the axis of the shaft (i.e. radius of shaft) is known as
A Bending moment
B Twisting moment
C Torsional rigidity
D Flexural rigidity
The natural frequency of free transverse vibrations due to a point load acting over a simply supported shaft is equal to (where $$\delta $$ = Static deflection of a simply supported shaft due to the point load)
A $$\frac{{0.4985}}{{\sqrt \delta }}$$
B $$\frac{{0.5615}}{{\sqrt \delta }}$$
C $$\frac{{0.571}}{{\sqrt \delta }}$$
D $$\frac{{0.6253}}{{\sqrt \delta }}$$
The torsional rigidity of a shaft is expressed by the
A Maximum torque it can transmit
B Number of cycles it undergoes before failure
C Elastic limit up to which it resists torsion, shear and bending stresses
D Torque required to produce a twist of one radian per unit length of shaft
The torsional rigidity of a shaft is given by
A $$\frac{{\text{T}}}{{\text{J}}}$$
B $$\frac{{\text{T}}}{\theta }$$
C $$\frac{{\text{T}}}{{\text{r}}}$$
D $$\frac{{\text{T}}}{{\text{G}}}$$
Point A is 10 miles West of Point B. Point b is 30 miles North of pint C. Point C is 20 miles East of Point D. What is the distance (in miles) between Point A and Point D?
A 1010
B 1020
C 2010
D 3010
Point A is 10 km west of point B. Point B is 30 km north of point C. Point C is 20 km east of point D. What is the distance between point A and D?
A 1020Km
B 1010Km
C 2010Km
D 3010Km

Next steps