Related Questions

The resultant unbalanced force due to the two cylinders, along the line of stroke, is known as ______
The unbalanced forces along the line of stroke for the two cylinders constitute a ______ about the centre line between the cylinders.
In a locomotive, the maximum magnitude of the unbalanced force along the perpendicular to the line of stroke, is known as
If d=depth of cut in mm, f=feed in mm/stroke, n=stroke/min, l=length of stroke in mm, m= ratio of return stroke time to cutting stroke time, then find the formula for metal removal rate.
The tractive force in a locomotive with two cylinders is given by (where c = Fraction of reciprocating parts per cylinder, m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank and $$\theta $$ = Angle of inclination of crank to the line of stroke)
Two rectangular sheets of paper, each 30 cm × 18 cm are made into two right circular cylinders, one by rolling the paper along its length and the other along the breadth. The ratio of the volumes of the two cylinders, thus formed, is :
Due to partial balancing there is unbalanced force only along the line of stroke.
In order to facilitate starting of locomotive in any position, the cranks of a locomotive with two cylinders, are placed at
In order to facilitate the starting of locomotive in any position, the cranks of a locomotive, with two cylinders, are placed at ______________ to each other.
The secondary unbalanced force is __________ the primary unbalanced force.