Related Questions

The process capability of a machine is defined as the capability of the machine to
A Produces a definite volume of work per minute
B Perform definite number of operations
C Produce job at a definite spectrum of speed
D Holds a definite spectrum of tolerance and surface finish
What can be considered as basic building block of a digital criteria ?
A Logic gate
B Diode
C Semi-conducter
D CMOS
Which country hosted the fisrt ever G20 Digital Ministerial Meeting on Digital Ministerial on Digital Economy?
A Japan
B Germany
C Russia
D France
A company owns some land and buildings for which the following details are relevant : Cost of land Taka 50,000; cost of building Taka 100,000, estimated life of building 20 years, estimated residual value of building Taka 2000; estimated residual value of land Taka 50,000. The company uses the straight line depreciation method. Which is the correct annual depreciation charge for this asset?
A Taka 4000
B Taka 4900
C Taka 7400
D Taka 7500
A bus picks up a group of tourists at a hotel. The sightseeing bus travels 2 blocks north, 2 blocks east. I block south, 2 blocks east, and 1 block south. Where is the bus in relation to the hotel?
A 2 blocks north
B 1 block west
C 3 blocks south
D 4 blocks east
Which of the following property controls the horizontal overflow of a block or inline block?
A overflow-x
B overflow
C overflow-y
D overflow-k
When the drafter types the word BLOCK or selects the Make Block tool from the Draw tool bar the _________ will appear.
A Grid
B Block Text Box
C Block Definition Dialog
D None of the above
Exception generated in try block is caught in ........... block.
A catch
B throw
C throws
D finally
In a band and block brake, the ratio of tensions on tight side and slack side of the band is (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the center of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = \mu \theta {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$
In a band and block brake, the ratio of tensions on the tight and slack sides of band is given by (where $$\mu $$ = Coefficient of friction between the blocks and the drum, $$\theta $$ = Semi-angle of each block subtending at the centre of drum and n = Number of blocks)
A $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_{\text{2}}}}} = \mu \theta \times {\text{n}}$$
B $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\mu \theta } \right)^{\text{n}}}$$
C $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 - \mu \tan \theta }}{{1 + \mu \tan \theta }}} \right)^{\text{n}}}$$
D $$\frac{{{{\text{T}}_1}}}{{{{\text{T}}_2}}} = {\left( {\frac{{1 + \mu \tan \theta }}{{1 - \mu \tan \theta }}} \right)^{\text{n}}}$$

Next steps