Related Questions

The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is
A 0.3
B 0.9
C 0.03
D 0.66
The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is
A 0.1
B 0.55
C 0.95
D 1.85
Which of the following wireless communication system has the fastest speed?
A Bluetooth
B Wi-fi
C WiMax
D Fiber Optic
The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be
A Parabolic
B Hyperbolic
C Straight line
D None of these
In a two lane channel, bottom width of channel is given by
A Manoeuvring lane + (2 × Bank clearance lane)
B (2 × Manoeuvring lane) + (2 × Bank clearance lane)
C (2 × Manoeuvring lane) + (2 × Bank clearance lane + ship clearance lane)
D Manoeuvring lane + (2 × Bank clearance lane) + ship clearance lane
If the cross-sectional area of the channel in n-channel JEFT increases, the drain current ___________
A is increased
B is decreased
C remains the same
D none of the above
If B and d are the bed width and depth of a channel in meters, the combined losses due to evaporation and seepage in cumecs per kilometer length of the channel, is
A $$\frac{1}{{50}} \times {\left( {{\text{B}} + {\text{d}}} \right)^{\frac{2}{3}}}$$
B $$\frac{1}{{100}} \times {\left( {{\text{B}} + {\text{d}}} \right)^{\frac{2}{3}}}$$
C $$\frac{1}{{150}} \times {\left( {{\text{B}} + {\text{d}}} \right)^{\frac{2}{3}}}$$
D $$\frac{1}{{200}} \times {\left( {{\text{B}} + {\text{d}}} \right)^{\frac{2}{3}}}$$
The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel.
A 0.34 times
B 0.67 times
C 0.81 times
D 0.95 times
The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel.
A 0.34 times
B 0.67 times
C 0.81 times
D 0.95 times
The critical depth for a channel is given by (where q = Unit discharge (discharge per unit width) through the channel)
A $${\left( {\frac{{\text{q}}}{{\text{g}}}} \right)^{\frac{1}{2}}}$$
B $${\left( {\frac{{{{\text{q}}^2}}}{{\text{g}}}} \right)^{\frac{1}{3}}}$$
C $${\left( {\frac{{{{\text{q}}^3}}}{{\text{g}}}} \right)^{\frac{1}{4}}}$$
D $${\left( {\frac{{{{\text{q}}^4}}}{{\text{g}}}} \right)^{\frac{1}{5}}}$$

Next steps