Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
A laboratory teacher had 1.5 litres of concentrated sulfuric acid. She replaces concentrated sulfuric acid with water after every class till the carton is empty. One student needs 10 ml of sulfuric acid mixture in every class. First class had 20 students and since then all other classes observed 10 students. Calculate total quantity of water with which mixture of sulfuric acid and water is replaced till carton is empty. Note 1.5 litres of concentrated sulfuric acid had 90% sulfuric acid and rest water
Solution-1 containing 10% nitric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% nitric acid and 10% acetic acid at the rate D, the product formed contains 30% nitric acid and 20% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
Which one of the following is a tribasic acid?
Which is a tribasic acid?
Match List-I with List-II and select the correct answer by using the codes given below the list:   List – I (Name of acid)    List – II (Source)  (a)  Lactic acid (i) Apple  (b) Oxalic acid (ii) Curd  (c) Ascorbic acid (iii) Spinach  (d) Malic acid (iv) Indian Gooseberry (Amla)
In a 60 litre solution of acid and water, the ratio of acid and water is 3 : 7. How much (in litre) acid is to be mixed in the solution so that the ratio of acid and water in the ration of acid and water in the resulting solution is 1 : 2?
Which statement is correct about weak acid? Statement 1: An acid that is completely ionized in water and thus produces a very small amount of hydrogen ions is called a weak acid.  Statement 2: Carbonic acid and sulfurous acid are also strong acids.