Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A wheel so constructed that the centre line of the rim is located out board of the attachment face of the disc is called-
A wheel so constructed that the centre line of the rim is located in board of the attachment face of the disc is called
6 faces of a cube is painted with different colour. Red face is opposite to the black face. The face adjacent to the bottom face is white. Brown face is adjacent to blue face. Red face is at the bottom. Which face will be on exactly opposite to the brown face.
A, B, C, D, E and F are six girls who use 6 different face wash – Pond’s, Lakme, Lotus, Garnier, Himalaya and Kaya (but not necessarily in the same order). They also like six different colours – Red, Blue, Brown, Peach, Black and White (also not necessarily in the same order. A and C do not like a Red colour. The girl who uses Lakme face wash likes Peach colour. The girl who likes White colour does not use Kaya nor Lotus face wash. B neither likes Peach nor Red colour. D does not like a Blue colour but uses a Lotus face wash. The girl who uses Pond’s face wash likes Red colour. C does not use Lakme face wash nor likes white colour. F neither uses Himalaya nor Kaya face wash but likes Brown colour. Who does use Himalaya’s face wash?
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 10 mm between the shoe and the rim. The pull exerted by the spring is then 700 N. The mass centre of the shoe is 150 mm from the axis of the clutch. If the internal diameter of the rim is 500 mm, the mass of each shoe is 6 kg, the stiffness of each spring is 75 N/mm and the coefficient of friction between the shoe and the rim is 0.35; find the power transmitted by the clutch at 400 r.p.m.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 7.5 mm between the shoe and the rim. The pull exerted by the spring is then 600 N. The mass centre of the shoe is 120 mm from the axis of the clutch. If the internal diameter of the rim is 350 mm, the mass of each shoe is 5 kg, the stiffness of each spring is 60 N/mm and the coefficient of friction between the shoe and the rim is 0.2; find the speed of the centrifugal clutch, if the power transmitted is 40.168 kW.
If the centre line of the rim is located inside of the fixing face of the disc, then it is a
Given are the steps to draw a perpendicular to a line at a point within the line when the point is near the centre of line. Arrange the steps. Let AB be the line and P be the point in it i. Join F and P which is perpendicular to AB. ii. Now C as centre take the same radius and cut the arc at D and again D as centre with same radius cut the arc further at E. iii. With centre as P take any radius and draw an arc (more than a semicircle) cuts AB at C. iv. Now D, E as centre take radius (more than half of DE) draw arcs which cut at F.
If the centre line of the rim coincides with the fixing face of the disc, then it is a
Given are the steps to draw a perpendicular to a line at a point within the line when the point is near the centre of a line. Arrange the steps. Let AB be the line and P be the point in it i. P as centre, take convenient radius R1 and draw arcs on the two sides of P on the line at C, D. ii. Join E and P iii. The line EP is perpendicular to AB iv. Then from C, D as centre, take R2 radius (greater than R1), draw arcs which cut at E.