Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In order to increase the bandwidth of tuned amplifiers, one can use: 1. Tuned circuit with inductance having high Q factor 2. Double tuned amplifier with two tuned circuits coupled by mutual inductance 3. Staggered tuned amplifiers in which different tuned circuits which are cascaded are tuned to slightly different frequencies
Two coils are having self-inductance of 5 mH and 10 mH and a mutual inductance of 0.5 mH in a differential connection. The equivalent inductance of the combination is ___________
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
In a mutual fund Capti, customers gets 100% increment in 5 years and in another mutual fund Capfirst customers get 200% in 12 years. What amount will Anamika get after 3 years if she invests total of Rs. 27000 in these two mutual funds in the ratio of 5 : 4? (Assume both mutual fund credits interest in simple rate)
Given below are certain statements regarding the average power dissipated in different types of circuits. Identify the correct option. A. Maximum power dissipation occurs in the case of the resistive circuit and when the LCR circuit is at resonance. B. In the case of a purely inductive circuit, no power is dissipated. C. In the case of the RC circuit, power is dissipated in resistor and capacitor both.
In a resonance tube with tuning fork of frequency 512Hz, first resonance occurs at water level equal to 30.3cm and second resonance occurs at 63.7cm. The maximum possible error in the speed of sound is?
Find the coupling coefficient if the Mutual inductance is 20H, the inductance of coil 1 is 2H and the inductance of coil 2 is 8H.
Find the value of x if the Mutual inductance is x H, the inductance of coil 1 is 2H and the inductance of coil 2 is 8H. The coupling coefficient is 5.
Find the value of x if the Mutual inductance is 20H, the inductance of coil 1 is xH and the inductance of coil 2 is 8H. The coupling coefficient is 5.
If L1 and L2 are the inductance used in the Hartley oscillator, the effective inductance in the equation of frequency calculation is equal to (Without considering mutual inductance).