Related Questions

Negative consumer reaction to a product is generated by a perceived gap between consumer expectation and product performance. Businesses should use advertising to adjust consumer expectations to coincide with their product performances. which of the following , if true, would most weaken the argument above?
A Most consumers can assess the actual performance of the products they purchase.
B Unless consumer expectations about a product are sufficiently high, consumers will not purchase that product.
C Most consumer purchase products based upon their brand name instead of their past performance.
D Expectations of most consumer are influenced by the claims made for those products by the manufacturers.
If Bashar can run around a ground four times in 20 minutes and Rahim can run around the same ground three times in 12 minutes, who can run around that ground more times in an hour, and how many times more can he run around ?
A Bashar, three times more
B Rahim , three times more
C They both go around 12 times
D Bashar, eight times more
Each of the following problem has a question and two statements which are labeled 1. and. Use the data given in 1. and 2. to decide whether the statements are sufficient to answer the question.Select one of the following . a.Statements (1) ALONE is sufficient,but (2) ALONE is not sufficient. b.Statements (2) ALONE is sufficient,but (1) ALONE is not sufficient. c. Both statement TOGETHER are sufficient but statement alone is sufficient . A fly crawls around the outside of a circle once.A second fly crawls around the outside of a square once.Which fly travels further ? (1) The diagonal of the square is equal to the diagonal of the circle.(2) The fly crawling around the circle took more time to complete has journey than the fly cawing around the square.
A A
B B
C C
D D
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
A 10 mm
B 15 mm
C 20 mm
D 25 mm
Two circular dials of exactly the same size are mounted on a wall side by side in such a way that their perimeters touch at one point. Dial 1, which is on the left , spins clockwise around its center , and dial 2 , which is on the right spins counter clockwise around its center . (Assume that there is no friction at the point of contact between the dials.) Each dial is marked on its perimeter at three points that are at equale distances around the points arked ondial 1 are N, O, and P and the points marked on dial 2 are X, Y, and Z. If points O and Z are just meeting at the point of contact between the dials , and if dial 1 spins at the same speed as dial 2, what is the smallest number of revolutions of each dial that will bring O and Z together again?
A 1
B 2
C 3
D 4
In a Y-connected source feeding a ∆-connected load,
A Each phase of the load has one-third of the full line voltage across it
B Each phase of the load has two-thirds of the full line voltage across it
C Each phase of the load has the full line voltage across it
D Each phase of the load has a voltage across it equal to $$\sqrt 3 $$
In a ∆-connected source driving a ∆-connected load, the
A Load voltage and line voltage are one-third the source voltage for a given phase
B Load voltage and line voltage are two-thirds the source voltage for a given phase
C Load voltage and line voltage cancel for a given phase
D Load voltage, line voltage, and source phase voltage are all equal for a given phase
In a ∆-connected source feeding a Y-connected load
A Each phase voltage equals the difference of the corresponding load voltages
B Each phase voltage equals the corresponding load voltage
C Each phase voltage is one-third the corresponding load voltage
D Each phase voltage is 60° Ωut of phase with the corresponding load voltage
What will be the reflection co-efficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ?
A Zero
B Unity
C Infinity
D None of the above

Next steps