Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A person purchases 10 used generators at Rs. 2,000 each. Accessories of Rs. 5,000 were used to repair and paint the generators. He was able to sell 6 generators at Rs. 2,500 each but incurred a loss of 10% in the whole deal. Find the selling price of each generator and loss percentage on each generator of remaining generators.
DC generators are installed near the load centres to reduce
In SI engines, to obtain required firing order
1. Battery is installed
2. Distributer is installed
3. Carburettor is installed
4. Ignition coil is installed
Which of the above statements is/are correct?
A power system has three synchronous generators. The turbine-governor characteristics corresponding to the generators are P1 = 50(50 - f), P2 = 100(51 - f), P3 = 150(52 - f) Where, f denotes the system frequency in Hz, and P1, P2, P3 are the power outputs of the turbines in MW. Assuming generators and transmission network to be lossless, the system frequency for a load of 700 MW is
Consider the following statement: 1. Initial load tests and routine load tests are carried out on test piles and working Piles, respectively. 2. In a pile load test, the allowable load can be taken equal to half the ultimate load at which the total settlement amounts to one-tenth of the pile diameter. 3. In a pile load test, the allowable load can be taken equal to two-thirds of the total toad which causes a plastic settlement of 6 mm. Which of the above statements are correct?
Two statements are given, followed by two conclusions numbered I and II. Assuming the statements to be true, even if they seem to be at variance with commonly known facts, decide which of the conclusions logically follow(s) from the statements. Statements: Some candles are bulbs Some bulbs are generators Conclusions: I. Some candles are generators II. All candles are generators
In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided oni) bottom face near counterfortii) top face near counterfortiii) bottom face near centre of spaniv) top face near centre of span The correct answer is
In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on
i) bottom face near counterfort
ii) top face near counterfort
iii) bottom face near centre of span
iv) top face near centre of span
The correct answer is
The load on a hydel plant varies from a minimum of 10,000 kW to a maximum of 35,000 kW. Two turbo-generators of capacities 20,000 kW each have been installed. Calculate Plant factor.
In connection with inspection and testing of concrete structures as per IS 456:2000, while conducting load tests on flexural members, what is the load (L) and minimum duration of load application(T) on the structure? (Use notations as : DL : dead Load, IL : Imposed load)