Related Questions

A triple riveted butt joint with double straps of unequal width is to be designed for a boiler shell. The pitch of the rivets in the outer row is double the pitch in the inner row and zigzag riveting is proposed. Which of the following statement is correct?
A There are four rivets per pitch length, all in double shear
B There are four rivets per pitch length, out of which two are in single shear and two are in double shear
C There are five rivets per pitch length, all in double shear
D There are five rivets per pitch length, out of which four are in double shear and one is in single shear
If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
A Chain riveting
B Zigzag riveting
C Diamond riveting
D Crisscross riveting
The hoop stress in a riveted cylindrical shell of diameter (d), thickness (t) and subjected to an internal pressure (p) is (where $$\eta $$ = Efficiency of the riveted joint)
A $$\frac{{{\text{pd}}}}{{{\text{t}}\eta }}$$
B $$\frac{{{\text{pd}}}}{{2{\text{t}}\eta }}$$
C $$\frac{{{\text{pd}}}}{{4{\text{t}}\eta }}$$
D $$\frac{{{\text{pd}}}}{{8{\text{t}}\eta }}$$
For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.
A 1 to 1.5
B 2.5 to 3.5
C 4 to 5
D 6 to 8
Minimum pitch of the rivets shall not be less than (where d is gross diameter of rivet)
A 1.5 d
B 2.0 d
C 2.5 d
D 3.0 d
According to I.B.R., shearing resistance required to shear off the rivet per pitch length (in double shear) is (where n = Number of rivets per pitch length)
A $$\frac{\pi }{4}{{\text{d}}^2} \times \tau \times {\text{n}}$$
B $$1.875 \times \frac{\pi }{4}{{\text{d}}^2} \times \tau \times {\text{n}}$$
C $$2 \times \frac{\pi }{4}{{\text{d}}^2} \times \tau \times {\text{n}}$$
D $$3 \times \frac{\pi }{4}{{\text{d}}^2} \times \tau \times {\text{n}}$$
Tearing resistance required to tear off the plate per pitch length is (where p = Pitch of rivets, d = Dia. of rivet hole and $${\sigma _{\text{t}}}$$ = Permissible tensile stress for plate material)
A $${\text{pd}}{\sigma _{\text{t}}}$$
B $${\text{pt}}{\sigma _{\text{t}}}$$
C $$\left( {{\text{p}} - {\text{d}}} \right){\sigma _{\text{t}}}$$
D $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}}{\sigma _{\text{t}}}$$
The pull required to tear off the plate per pitch length is (where p = Pitch of rivets, t = Thickness of plates and $${\sigma _{\text{t}}},\,\tau $$  and $${\sigma _{\text{c}}}$$ = Permissible tensile, shearing and crushing stresses respectively)
A $$\left( {{\text{p}} - 2{\text{d}}} \right){\text{t}} \times {\sigma _{\text{c}}}$$
B $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times \tau $$
C $$\left( {{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
D $$\left( {2{\text{p}} - {\text{d}}} \right){\text{t}} \times {\sigma _{\text{t}}}$$
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
A Single riveted
B Double riveted
C Multi riveted
D None of these
In a riveted joint, when the number of rivets decreases from the inner most row to outer most row, the joint is said to be
A Chain riveted
B Zig-zag riveted
C Diamond riveted
D None of these

Next steps