Related Questions

The yield point in fatigue loading compared to that in static loading is less. The ratio of ultimate tensile strength to endurance limit of a material subjected to fatigue loading is
A 0.5
B 1
C 1.5
D 2
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
If ‘W’ is the load on a circular slab of radius ‘R’, the maximum radial moment at the centre of the slab, is
A $$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$
B $$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$
C $$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$
D $$\frac{{5{\text{W}}{{\text{R}}^2}}}{{16}}$$
If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is
A $$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$
B $$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$
C $$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$
D Zero
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)
A $$\sigma \left( {1 + \frac{{\text{b}}}{{2{\text{a}}}}} \right)$$
B $$\sigma \left( {1 + \frac{{2{\text{a}}}}{{\text{b}}}} \right)$$
C $$\sigma \left( {1 + \frac{{\text{b}}}{{3{\text{a}}}}} \right)$$
D $$\sigma \left( {1 + \frac{{3{\text{a}}}}{{\text{b}}}} \right)$$
The International Dateline deflects to a side to avoid ________
A Society islands
B Hawaii
C Aleutian Islands
D All the above
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
An R.C.C. roof slab is designed as a two way slab if
A It supports live loads in both directions
B The ratio of spans in two directions is less than 2
C The slab is continuous over two supports
D The slab is discontinuous at edges
If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)
A $$\frac{{\text{M}}}{{100{\text{Q}}}}$$
B $$\frac{{\text{M}}}{{10\sqrt {\text{Q}} }}$$
C $$\sqrt {\frac{{\text{M}}}{{\text{Q}}}} $$
D $$\sqrt {\frac{{\text{M}}}{{100{\text{Q}}}}} $$

Next steps