If ‘W’ is the load on a circular slab of radius ‘R’, the maximum radial moment at the centre of the slab, is

If ‘W’ is the uniformly distributed load on a circular slab of radius ‘R’ fixed at its ends, the maximum positive radial moment at its centre, is

A

$$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$

B

$$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$

C

$$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$

D

None of these

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is

A

$$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$

B

$$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$

C

$$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$

D

Zero

For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is

A

1

B

2

C

3

D

5

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than

A

$$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$

B

$$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} + \frac{{2{\text{D}}}}{3}} \right)^2}$$

C

$$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$

D

$$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{\text{D}}}{3}} \right)^2}$$

If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)

A

$$\frac{{\text{M}}}{{100{\text{Q}}}}$$

B

$$\frac{{\text{M}}}{{10\sqrt {\text{Q}} }}$$

C

$$\sqrt {\frac{{\text{M}}}{{\text{Q}}}} $$

D

$$\sqrt {\frac{{\text{M}}}{{100{\text{Q}}}}} $$

কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)

A

4 cm

B

6 cm

C

9 cm

D

12 cm

কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)

A

4 cm

B

6 cm

C

9 cm

D

12 cm

When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)

A

Is at the maximum distance from CG of the rivet group

B

Is at the minimum distance from CG of the rivet group

C

Gives the maximum angle between the two forces Fa and Fm

D

Gives the minimum angle between the two forces Fa and Fm

The retardation of a flat faced follower when it has contact at the apex of the nose of a circular arc cam, is given by (where OQ = Distance between the centre of circular flank and centre of nose)

A

$${\omega ^2} \times {\text{OQ}}$$

B

$${\omega ^2} \times {\text{OQ}}\sin \theta $$

C

$${\omega ^2} \times {\text{OQ}}\cos \theta $$

D

$${\omega ^2} \times {\text{OQtan}}\theta $$

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed

A

10 mm

B

15 mm

C

20 mm

D

25 mm

If ‘W’ is the load on a circular slab of radius ‘R’, the maximum radial moment at the centre of the slab, is

Related Questions