Related Questions

কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
A 4 cm
B 6 cm
C 9 cm
D 12 cm
The breadth of a ribbed slab containing two bars must be between
A 6 cm to 7.5 cm
B 8 cm to 10 cm
C 10 cm to 12 cm
D 12 cm to 15 cm
The maximum diameter of a bar used in a ribbed slab, is
A 12 mm
B 6 mm
C 20 mm
D 22 mm
The thickness of the topping of a ribbed slab, varies between
A 3 cm to 5 cm
B 5 cm to 8 cm
C 8 cm to 10 cm
D 12 cm to 15 cm
For a ribbed slab
A Clear spacing between ribs shall not be greater than 4.5 cm
B Width of the rib shall not be less than 7.5 cm
C Overall depth of the slab shall not exceed four times the breadth of the rib
D All the above
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
An R.C.C. roof slab is designed as a two way slab if
A It supports live loads in both directions
B The ratio of spans in two directions is less than 2
C The slab is continuous over two supports
D The slab is discontinuous at edges
If ‘W’ is the load on a circular slab of radius ‘R’, the maximum radial moment at the centre of the slab, is
A $$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$
B $$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$
C $$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$
D $$\frac{{5{\text{W}}{{\text{R}}^2}}}{{16}}$$
If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is
A $$\frac{{{\text{W}}{{\text{R}}^2}}}{{16}}$$
B $$\frac{{2{\text{W}}{{\text{R}}^2}}}{{16}}$$
C $$\frac{{3{\text{W}}{{\text{R}}^2}}}{{16}}$$
D Zero

Next steps