Related Questions

For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)
The foundation which consists of a thick reinforced cement slab covering whole area to support heavy concentrated structural loads, is known as
If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by
The elevator in an eleven-storied office building travels at the rate of one floor per 1/4 minute, which allows time for picking up and letting down passengers. At the main floor and at the top floor the operator stops for 1 minute. How many complete (with return) trips will the operator makes during a 7-hour period?
The elevator in an eleven-storied office building travels at the rate of one floor per 1/4 minute, which allows time for picking up and letting down passengers. At the main floor and at the top floor the operator stops for 1 minute. How many complete (return) trips will the operator make during a 7 hours period?
Two beams, one of circular cross-section and the other of square cross-section, have equal areas of cross-sections. When these beams are subjected to bending,
According to the steel beam theory of doubly reinforced beams