Related Questions

In a doubly-reinforced beam if ‘c’ and ‘t’ are stresses in concrete and tension reinforcement, ‘d’ is the effective depth and ‘n’ is depth of critical neutral axis, the following relationship holds good
A $$\frac{{{\text{mc}}}}{{\text{t}}} = \frac{{\text{n}}}{{{\text{d}} - {\text{n}}}}$$
B $$\frac{{{\text{m}} + {\text{c}}}}{{\text{t}}} = \frac{{\text{n}}}{{{\text{d}} + {\text{n}}}}$$
C $$\frac{{{\text{t}} + {\text{c}}}}{{\text{m}}} = \frac{{{\text{d}} + {\text{n}}}}{{\text{n}}}$$
D $$\frac{{\text{m}}}{{{\text{t}} + {\text{c}}}} = \frac{{\text{n}}}{{{\text{d}} - {\text{n}}}}$$
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
The steel bars in a reinforced cement concrete beam are embedded __________ of the beam.
A In the center
B Near the bottom
C Near the top
D At any position
In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called
A Under-reinforced section
B Over reinforced section
C Economic section
D Critical section
The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
If d and n are the effective depth and depth of the neutral axis respectively of a singly reinforced beam, the lever arm of the beam, is
A d
B n
C $${\text{d}} + \frac{{\text{n}}}{3}$$
D $${\text{d}} - \frac{{\text{n}}}{3}$$
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A $$\frac{2}{3}$$
B $$\frac{3}{2}$$
C $$\frac{5}{8}$$
D $$\frac{8}{5}$$

Next steps