Bissoy.com
Doctors Medicines MCQs Q&A

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is Correct Answer 40

Related Questions

Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
Consider the following statements; 1) In a reinforced concrete member subjected to flexure, the externally applied moment is resisted by an internal couple formed by steel and concrete and their magnitudes vary with the applied moment, while the lever arm of the internal couple remains constant 2) In a prestressed concrete. Member, the external moment is resisted by an internal couple, but it is the lever arm that changes with the loading conditions and the stress in steel remain practically constant Which of the above statements is/are correct?
A 2 m long beam BC carries a single concentrated load at its mid span and is simply supported at its end by two cantilevers AB = 1m long and CD = 2m long as shown in figure. The shear force at end A and bending moment at end D of the cantilever, respectively will be -
What is the condition for a tree to be weight balanced. where a is factor and n is a node? >= a*weight and weight >= a*weight. b) weight >= a*weight and weight >= a*weight. c) weight >= a*weight and weight >= a*weight. d) weight is a non zero
A Straight cantilever of uniform area carries a udl over its entire length. If the free end of a cantilever is now prop at the level of the fixed end, the vertical force required at the prop be __________
The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6 t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt,
An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam
A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is
Weight of Arun is 4/7 of the weight of Bablu. Weight of Bablu is 1/2 of the weight of Ram. Weight of Ram is 4 times of the weight of Deep. Weight of Deepis 1/9 of the weight of Ankit. Whose weight is more than the weight of Deep but less than the weight of Bablu?