Bissoy.com
Doctors Medicines MCQs Q&A

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2. These are subjected to a compressive load 1,00,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2, the stresses developed are:

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2. These are subjected to a compressive load 1,00,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2, the stresses developed are: Correct Answer $${\sigma _{\text{b}}}$$ = 10 N/mm<sup>2</sup>, $${\sigma _{\text{s}}}$$ = 20 N/mm<sup>2</sup>

Related Questions

10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
Two similar bars of Steel and Aluminium are heated to a same temperature. Forces are applied at the ends of the bars to maintain their lengths unaltered. If the ratio of Young’s moduli of Steel and Aluminium is 3, and the ratio of the coefficients of thermal expansion of Steel to that of Aluminium is 0.5, what is the stress on the Aluminium bar if the stress on the Steel bar is 100 MPa?
A bar of bronze and a bar of steel are placed between two immovable supports, A and B as shown in the figure. The physical constant are : (where L = Length of bars, A = cross-sectional area, α = linear coefficient of thermal expansion, E = Young’s modulus) Steel                                      Bronze L = 0.5 m                              L = 0.75 m A = 6 × 10-4m2                    A = 12 × 10-4 m2 α = 12 × 10-6/°C                 α = 20 × 10-6/°C E = 200 GPa                         E = 100 GPa The stresses in the steel and bronze, when temperature drops by 50°C is
Connie has a number of gold bars, all of different weights. She gives the 24 lightest bars, which weigh 45% of the total weight, to Brennan. She gives the 13 heaviest bars, which weigh 26% of the total weight, to Maya. She gives the rest of the bars to Blair. How many bars did Blair receive?
In two types of brass, the ratios of Copper to Zinc are 8:3 and 15:7 respectively. If the two types of brass be melted and mixed in the ratio 5:2 a new typeof brass is obtained. The ratio of Copper to Zinc in this new type of brass is
The table shows the various annual expenses of a firm (in '000s of rupees) from 2002-2006. By how much is the average expenditure on Delivery is more than the average expenditure on Interest? Year Particular Purchases Wages Rent Interest Delivery 2002 62500 87500 100000 40000 40000 2003 75000 60000 85000 35000 45000 2004 100000 75000 90000 55000 55000 2005 110000 90000 50000 45000 55000 2006 125000 100000 70000 50000 75000
A steel bar of 40mm x 40mm square cross-section is subjected to an axial compressive load of 200kN. If the length of the bar is 2m and E=200GPa, the elongation of the bar well be ____________
A steel bar of 20mm x 20mm square cross-section is subjected to an axial compressive load of 100kN. If the length of the bar is 1m and E=200GPa, then what will be the elongation of the bar?