Related Questions

In _________ operation, the chip thickness is minimum at the beginning of the cut and it reaches to the maximum when the cut terminates.
A Conventional milling
B Climb milling
C Face milling
D End milling
A tailor had a number of shirt pieces to cut from some large pieces of fabric. He cut each large piece into 10 smaller pieces. He cut at the rate of 45 cuts per minute . How many large pieces would be cut in 24 minutes?
A 32
B 54
C 108
D 120
A tailor had a number of shirt pieces to cut from large piece pieces of fabric. He cut each large piece into 10 smaller pieces. He cut at the rate of 45 cuts per minute. How many large pieces would be cut in 24 minutes?
A 32
B 54
C 108
D 120
A tailor had a number of shirt pieces to cut from a roll of fabric. He cut each roll of equal length into 10 pieces. He cut at the rate of 45 cuts a minute. How many rolls would be cut in 24 minutes ?
A 32 rolls
B 54 rolls
C 108 rolls
D 120 rolls
Ms. Rahena needs to get from Town C. The only was to get Town C is taka a bus from Town A to Town B and then take a train from Town B to C. The bus leaves Town A at 8.00 am and reaches Town b after 212 hours. The first train leaves Town B at 9.00 am and then there is a train every 50 minutes. The train reaches Town C 40 minutes after its departure . If Ms. Rehana leaves Town A at 8.00 am, When is the earliest she would arrive at Town C?
A 11:10 am
B 11.20 am
C 12.00 noon
D 10.30 am
A can do a piece of work in 24 days, B in 32 days and C in 64 days. All begin to do it together, but A leaves after 6 days and B leaves 6 days before the completion of the work. How many days did the work last?
A 20
In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be
A Doubled
B Halved
C Quadrupled
D Unchanged
The cutting force in up milling ________ per tooth movement of the cutter.
A Is zero
B Is maximum
C Decreases from maximum to zero
D Increases from zero to maximum
Timothy leaves home for school, riding his bicycle at a rate of 9 miles per hour. Fifteen minutes after he leaves, his mother sees a Timothy's math homework lying on his bed and immediately leaves home to bring it to him. If his mother drives at 36 miles per hour, how far (in terms of miles) must she drive before she reaches Tmothy?
A 1/3
B 4
C 3
D 12
A closely coiled helical spring is acted upon by an axial force. The maximum shear stress developed in the spring is $$\tau $$. The half of the length of the spring if cut off and the remaining spring is acted upon by the same axial force. The maximum shear stress in the spring in new condition will be
A $$\frac{\tau }{2}$$
B $$\tau $$
C $$2\tau $$
D $$4\tau $$

Next steps