Related Questions

A tank is filled by three pipes with uniform flow. The first two pipes operating simultaneously fill the tank in the same time during which the tank is filled by the third pipe alone. The second pipe fills the tank 5 hours faster than the first pipe and 4 hours slower than the third pipe. The time required by the first pipe is:
A water tank with 64-gallon capacity is filled by pipe A and emptied by pipe B. If the rate of water flow through pipe A is 2 gallons per hour, how many gallons per hour should flow through pipe B so that when both pipes are open, the initially empty tank shold be full in exactly 96 hours?
Water flows into an empty 64-gallon drum through pipe A and flows out through pipe B. If the rate of flow through A is 2 gallons/hour, how many gallons per hour must flow out through pipe B so that the drum is full in exactly 96 hours?
Pipe A alone can fill a tankin 8 hours .Pipe B can fill it in 6 hours . If both the pipes are operated and after 2 hours pipe A is closed, then the other pipe will fill the tank in.
A pipe fills a tank in P minuties and another pipe fills the tank in Q minutes. A different pipe makes the tank empty in R minutes. If all these three pipe are opened then in how many minutes the tank will be full?
Pipe A can fill an empty cistern in 4 hours while along with Pipe B it can fill it up in 3 hours. Only Pipe A is turned on for an hour after which Pipe B is also turned on. How much total time will it take to fill up the cistern?
For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is
Nature of fluid flow during the opening of a valve in a pipeline is
What is the ratio of the velocity at the axis of the pipe to the mean velocity of flow in case of pipe flow under viscous condition?
In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of