Related Questions

Applying a pressure drop across a capillary results in a volumetric flow rate 'Q' under laminar flow conditions. The flow rate for the same pressure drop, in a capillary of the same length but half the radius is
A $$\frac{{\text{Q}}}{2}$$
B $$\frac{{\text{Q}}}{4}$$
C $$\frac{{\text{Q}}}{8}$$
D $$\frac{{\text{Q}}}{{16}}$$
The inverter OR gate and AND gate are called decision-making elements because they can recognize some input _____ while disregarding others. A gate recognizes a word when its output is _____
A words, high
B bytes, low
C bytes, high
D character, low
E None of the above
There are three different roads from Shah Bag to Farm Gate and 4 different roads from Farm Gate to Banani. How many different routes are there from Shah Bag to Banani via Farm Gate?
A 4
B 3
C 12
D 7
There are three different roads from Shah Bag to Farm Gate and 4 different roads from Farm Gate to Banani. How many different routes are there Shah Bag to Banani which go through Farm Gate?
A 4
B 3
C 7
D 12
X-OR গেইট তৈরিতে ব্যবহূত হয়- i. OR Gate ii. AND Gate iii. NOT Gate নিচের কোনটি সঠিক?
A i ও ii
B i ও iii
C ii ও iii
D i, ii ও iii
The mixing vat in a factory receives liquid ingredients through six separate value--- labeled R.S.T.U,Y and Z -- each of which has exactly two settings: open and closed.The mixing vat operator must ensure that each valve is set open or closed according to the following conditions: If T is open, both S and Z must be closed, R and Z cannot both be closed at the same time; If Y is closed, Z must also be closed;S and U cannot both be open at the same time. Which of the following, if given to the mixing vat operator as an instruction, would not determine the setting of any other valve ?
A S must be open
B T must be open
C U must be open
For the same terminal conditions and fitting size, the least friction loss is incurred in a/an
A T-joint
B Union
C 45° elbow
D 90°bend
Pressure drop through plate tower as compared to that through packed tower, for the same duty will be
A Less
B More
C Equal
D Either A or B; depends on the packing height
A globe valve is the most suitable for applications, in which
A Fluid flow control is required
B Fluid contains dispersed solid particles
C Valve is required to be either fully open or fully closed
D One way flow is required
When a UJT is turned ON, the resistance between emitter terminal and lower base terminal ___________
A Remains the same
B Is decreased
C Is increased
D None of the above

Next steps