If a given force (or a given system of forces) acting on a body __________ the position of the body, but keeps it in equilibrium, then its effect is to produce internal stress in the body.

If a given force (or a given system of forces) acting on a body __________ the position of the body, but keeps it in equilibrium, then its effect is to produce internal stress in the body. Correct Answer Does not change

Bissoy MCQ

Related Questions

The magnitude of two forces, which when acting at right angle produce resultant force of $$\sqrt {10} $$  kg and when acting at 60° produce resultant of $$\sqrt {13} $$  kg. These forces are
The magnitude of two forces, which when acting at right angle produce resultant force of $$\sqrt {10} $$ kg and when acting at 60° produce resultant of $$\sqrt {13} $$ kg. These forces are
The system of forces acting on the aircraft are propulsive forces, aerodynamic forces, gravitational forces and these result in inertial forces.
There are 50 boxes and 50 persons. Person 1 keeps 1 marble in every box, person 2 keeps 2 marbles in every 2nd box, person 3 keeps 3 marbles in every third box. The process goes on till person 50 keeps 50 marbles in the 50th box. Find the total number of marbles kept in the 50th box.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
For the conditions of the equilibrium of the body, i.e. the rigid body only the external forces defines the equilibrium. Because the internal forces cancels out so not to be considered.
For the conditions of the equilibrium of the body, i.e. the rigid body only the external conservative forces defines the equilibrium. Because the internal conservative forces cancels out so not to be considered.
For the conditions of the stability of equilibrium configuration of the body, i.e. the body only the external forces defines the equilibrium. Because the internal forces cancels out so not to be considered.
The change in length due to a tensile or compressive force acting on a body is given by (where P = Tensile or compressive force acting on the body, $$l$$ = Original length of the body, A = Cross-sectional area of the body and E = Young's modulus for the material of the body)
The design stress, which is more than the damaging stress, is the least unit stress that will render a member unfit for service before the end of its normal life. The design stress factor or factor of safety indicates the margin between design stress and the __________ stress.