Suppose that you have a customer who has a central HQ and six branch offices. They anticipate adding six more branches in the near future. They wish to implement a WAN technology that will allow the branches to economically connect to HQ and you have no free ports on the HQ router. Which of the following would you recommend?

A PPP
B HDLC
C Frame Relay
D ISDN

Correct Answer: Frame Relay

The key is "there are no free ports" on your router. Only Frame Relay can provide a connection to multiple locations with one interface, and in an economical manner no less.
Bissoy MCQ
#Networking #Wide Area Networks

Related Questions

You need to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface of the router for this connection?
A Router (config-if) #encapsulation frame-relay q933a
B Router (config - if) #encapsulation frame-relay ansi
C Router (config - if) #encapsulation frame-relay ietf
D Router (config - if) #encapsulation frame-relay cisco
The corporate office sends you a new router to connect, but upon connecting the console cable, you see that there is already a configuration on the router. What should be done before a new configuration is entered in the router?
A RAM should be erased and the router restarted
B Flash should be erased and the router restarted
C NVRAM should be erased and the router restarted
D The new configuration should be entered and saved
Some birds settled on the branches of a tree. First, they sat one to a branch and there was one bird too many. Next they sat two to a branch and there was one branch too many. How many branches were there?
A 3
B 4
C 5
D 6
E 2
A certain company assigns employees to offices in such a way that some of the offices can be empty and more than one employee can be assigned to an office. In how many ways can the company assign 3 employees to 2 different offices?
A 5
B 6
C 7
D 8
You save the configuration on a router with the copy running-config startup-config command and reboot the router. The router, however, comes up with a blank configuration. What can the problem be?
A You didn
B NVRAM is corrupted.
C The configuration register setting is incorrect.
D The newly upgraded IOS is not compatible with the hardware of the router.
When a router is connected to a Frame Relay WAN link using a serial DTE interface, how is the clock rate determined?
A Supplied by the CSU\/DSU
B By the far end router
C By the clock rate command
D By the Physical layer bits stream timing
You need to find the broadcast address used on a LAN on your router. What command will you type into the router from user mode to find the broadcast address?
A show running-config
B show startup-config
C show interfaces
D show protocols
Defining green banking is relatively easy. It means promoting environment -friendly practices and reducing your carbon footprint from your banking activities. This comes in many forms : using online banking instead of branch banking; paying bills online, opening up CDs (certificates of deposit) and money market accounts at online banks instead of large multi-branch banks. A green bank takes the biggest steps to support local green initiatives. Any combination of the above personal banking practices can help the environment. In this respect, online banks and smaller community banks have better track records than larger banks .However, these larger banks may be induced to go green . According to the passage, larger, multi -branch banks .
A can never become green banks .
B can become green banks if they reduce the number of branches and eliminate the use of paper .
C can become green banks if they can greatly reduce or eliminate carbon footprint form their banking activities.
D can become green banks if they support local green initiatives
If routers in a single area are configured with the same priority value, what value does a router use for the OSPF Router ID in the absence of a loopback interface?
A The Lowest IP address of any physical interface
B The Highest IP address of any physical interface
C The Lowest IP address of any logical interface
D The Highest IP address of any logical interface
Which of the following commands will configure all the default VTY ports on a router?
A Router#line vty 0 4
B Router (config) #line vty 0 4
C Router (config-if)#line console 0
D Router(config)#line vty all

Next steps