Which of the following commands displays the configurable parameters and statistics of all interfaces on a router?

A <code class="args"><em>show running-config</em></code>
B <code class="args"><em>show startup-config</em></code>
C <code class="args"><em>show interfaces</em></code>
D <code class="args"><em>show versions</em></code>

Correct Answer: <code class="args"><em>show interfaces</em></code>

With the show interfaces command, you can view the configurable parameters, get statistics for the interfaces on the router, verify if the interfaces are shut down, and see the IP address of each interface.
Bissoy MCQ
#Networking #IOS And Security Device Manager

Related Questions

You need to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface of the router for this connection?
A Router (config-if) #encapsulation frame-relay q933a
B Router (config - if) #encapsulation frame-relay ansi
C Router (config - if) #encapsulation frame-relay ietf
D Router (config - if) #encapsulation frame-relay cisco
You save the configuration on a router with the copy running-config startup-config command and reboot the router. The router, however, comes up with a blank configuration. What can the problem be?
A You didn
B NVRAM is corrupted.
C The configuration register setting is incorrect.
D The newly upgraded IOS is not compatible with the hardware of the router.
The corporate office sends you a new router to connect, but upon connecting the console cable, you see that there is already a configuration on the router. What should be done before a new configuration is entered in the router?
A RAM should be erased and the router restarted
B Flash should be erased and the router restarted
C NVRAM should be erased and the router restarted
D The new configuration should be entered and saved
If routers in a single area are configured with the same priority value, what value does a router use for the OSPF Router ID in the absence of a loopback interface?
A The Lowest IP address of any physical interface
B The Highest IP address of any physical interface
C The Lowest IP address of any logical interface
D The Highest IP address of any logical interface
You need to find the broadcast address used on a LAN on your router. What command will you type into the router from user mode to find the broadcast address?
A show running-config
B show startup-config
C show interfaces
D show protocols
Which of the following commands will configure all the default VTY ports on a router?
A Router#line vty 0 4
B Router (config) #line vty 0 4
C Router (config-if)#line console 0
D Router(config)#line vty all
Which of the following commands will allow you to set your Telnet password on a Cisco router?
A line telnet 0 4
B line aux 0 4
C line vty 0 4
D line con 0
Which of the following series of commands will restrict Telnet access to the router?
A Lab_A(config)#access-list 10 permit 172.16.1.1
Lab_A(config)#line con 0
Lab_A(config-line)#ip access-group 10 in
B Lab_A(config)#access-list 10 permit 172.16.1.1
Lab_A(config)#line vty 0 4
Lab_A(config-line)#access-class 10 out
C Lab_A(config)#access-list 10 permit 172.16.1.1
Lab_A(config)#line vty 0 4
Lab_A(config-line)#access-class 10 in
D Lab_A(config)#access-list 10 permit 172.16.1.1
Lab_A(config)#line vty 0 4
Lab_A(config-line)#ip access-group 10 in
Which command displays the list of all previous commands entered by the used?
A COMMANDS/ALL
B KEYDOS
C DOSKEY
D DIR/ALL
In recent survey of the student of a public university . It is found that 65% students are good in Mathematics and 45% students are good in Mathematics and 45% students are good in Statistics. How many students are good in both Mathematics and statistics of the public university?
A 20%
B 5%
C 15%
D 10%

Next steps