Related Questions

__________ nozzles are used in continuous casting of steel,
A Zircon
B Thoria
C Carborundum
D Beryllia
The primary purpose of a sprue in a casting mould is to
A Feed the casting at a rate consistent with the rate of solidification
B Act as a reservoir for molten metal
C Feed molten metal from the pouring basin to the gate
D Help feed the casting until all solidification takes place
In permanent mould casting method
A Molten metal is poured in a metallic mould, retained in the mould long enough for the outer skin to solidify and finally mould is turned over to remove molten metal still in molten condition
B Molten metal is poured and allowed to solidify while the mould is revolving
C Molten metal is forced into mould under high pressure
D None of the above
When the molten metal is fed in the cavity of a metallic mould by gravity, the method of casting is known as
A Die casting method
B Slush casting method
C Permanent mould casting method
D Centrifugal casting method
Continuous shell temperature measurement in a liquid-liquid heat exchanger is done by a
A Thermocouple
B Reistance thermometer
C Mercury in glass thermometer
D Vapor pressure thermometer
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
The centrifugal casting method, is used for casting articles of
A Symmetrical shape about vertical axis
B Symmetrical shape about horizontal axis
C Irregular shape
D Nonferrous metal only

Next steps