Related Questions

In continuous casting of liquid steel, the mould is made of
A water cooled steel
B water cooled copper
C refractory oxide
D silicon carbide
Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an
A Weir
B Hot wire anemometer
C Cup and vane aneometer
D None of these
The effect of considering friction in steam nozzles for the same pressure ratio leads to
A increase in dryness fraction of exit steam
B decrease in dryness fraction of exit steam
C no change in the quality of exit steam
D decrease or increase of dryness fraction of exit steam depending upon inlet quality
To refrain from separation in subsonic nozzles, the expansion angle must not be more than ______
A 10°
B 20°
C 30°
D 40°
The centrifugal casting method, is used for casting articles of
A Symmetrical shape about vertical axis
B Symmetrical shape about horizontal axis
C Irregular shape
D Nonferrous metal only
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
A casting defect which results in general enlargement of a casting is known as
A Shift
B Sand wash
C Swell
D Scab

Next steps