Related Questions

Bending moment at any section in a conjugate beam gives in the actual beam
A Slope
B Curvature
C Deflection
D Bending moment
The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
The bending moment of a cantilever beam of length $$l$$ and carrying a gradually varying load from zero at free end and w per unit length at the fixed end is ________ at the fixed end.
A $$\frac{{{\text{w}}l}}{2}$$
B $${\text{w}}l$$
C $$\frac{{{\text{w}}{l^2}}}{2}$$
D $$\frac{{{\text{w}}{l^2}}}{6}$$
The shear force of a cantilever beam of length $$l$$ and carrying a gradually varying load from zero at the free end and w per unit length at the fixed end is _________ at the fixed end.
A Zero
B $$\frac{{{\text{w}}l}}{4}$$
C $$\frac{{{\text{w}}l}}{2}$$
D $${\text{w}}l$$
A beam supporting a uniformly distributed load over its entire length L is pinned at one end and passes over a roller support at a distance x from the other end . The value of x such that the greatest bending moment in the beam is as small as possible, will be
A 0.293L
B 0.330L
C 0.111L
D 0.125L
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$

Next steps