Related Questions

Solution-1 containing 30% sulfuric acid flowing at the rate 10 Kg/min combines with Solution-2 containing 20% sulfuric acid flowing at the rate 5 Kg/min, if their product is out at the rate 20 Kg/min what is the percentage of sulfuric acid in the product?
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
What is the number of moles in 650 mL of 98% (v/v) sulfuric acid solution if density of sulfuric acid is 1.83 g/cm3?
A stock solution of 12.0 M sulfuric acid is made available. What is the best procedure to make up 100. mL of 4.0 M sulfuric acid using the stock solution and water prior to mixing?
Sulfurous acid is a weak acid, while sulfuric acid is a much stronger acid because
In a lead-acid cell dilute sulfuric acid (electrolyte) approximately comprises the following
Solution-1 containing 10% nitric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% nitric acid and 10% acetic acid at the rate D, the product formed contains 30% nitric acid and 20% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
The percentage of metals in a mine of lead ore is 60%. Now the percentage of silver is $$\frac{3}{4}$$% of metals and the rest is lead. If the mass of ore extracted from this mine is 8000 kg, the mass (in kg.) of lead is :