Bissoy.com
Doctors Medicines MCQs Q&A

Ion beam etching is similar to the ion beam milling process.

Ion beam etching is similar to the ion beam milling process. Correct Answer True

Ion beam etching is similar to the ion beam milling process that is used for transmission electron microscopy sample preparation. This is a physical process where ionized inert gas ions (usually Ar) are used to remove material from the wafer.

Related Questions

Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
Which of the following statements is/are true/false? A. An ion is a charged particle and can be negatively or positively charged. A negatively charged ion is called an anion and a positively charged ion, a cation B. An ion is a charged particle and can be negative or positively charged. A negatively charged ion is called a cation. And a positively charged ion, an anion.
Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
State whether the following statement about Chemical milling is true or false. “At higher temperatures, faster etching rates occur in Chemical milling.”
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
A CNC vertical milling machine has to cut a straight slot of 10 mm width and 2 mm depth by a cutter of 10 mm diameter between points (0,0) and (100,100) on the XY plane (dimensions in mm). The feed rate used for milling is 50 mm/min, milling time for the slot (in seconds) is
Ion beam etching is a highly directional process.
After etching is done, what is the next step in Photochemical milling process?
The etching rate and time are crucial to prevent over etching.