Bissoy.com
Doctors Medicines MCQs Q&A

What is the small conical surface of the valve results in which property?

What is the small conical surface of the valve results in which property? Correct Answer Self-centering

The small conical surface of the valve results in Self-centering. This is one of the important properties if this neglected, the charge won’t be compressed properly.

Related Questions

The accompanying image shows a large cube made of dark and white small sugar cubes. Small cubes of the diagonally arranged row of the bottom surface of the large cube, small cubes of the row with one face on the right-hand surface of the large cube, small cubes of the row with one face on the front surface of the large cube, and small cubes of the column with one face on the top of large cube surface are all dark. Select the number of small white cubes of the large cube.
Which of the following heart valves are mechanical valves? i. Ball Valve ii. Autograft Valve iii. Xenograft Valve iv. Single Leaflet Valve v. Homograft Valve vi. Bi leaflet Valves
A metallic sphere is melted and moulded to form conical bullets. If radius of a conical bullet is six times of its own height and the radius of the conical bullet is half of the radius of the metallic sphere, then what are the numbers of bullets formed?
A conical vessel of radius 7 cm and height 30 cm is completely filled with a liquid. From it, the liquid is poured into several conical vessels of radius 5 cm and height 21 cm, thereby filling them completely. What part of the last conical vessel will remain empty? Use π = 22/7.
A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is
Which part of the valve is a conical surface that comes in contact with a valve seat?
A conical friction clutch is used to transmit 75 kW at 1500 r.p.m. The semi cone angle is 20° and the coefficient of friction is 0.3. If the mean diameter of the bearing surface is 500 mm and the intensity of normal pressure is not to exceed 0.1 N/mm2, find the dimensions of the conical bearing surface.
Some small cubes of same height 7 cm but variable length and width are put inside a large cuboid of height 21 cm. Length and width of cuboid is 32 cm and 24 cm, respectively. Small cubes are put such that cubes at the bottom most layer is of similar base area; second layer contains all the cubes of similar base area and third layer have all the cubes of similar base area. Which of the following statement(s) given below is / are TRUE? A: If side of each small cubes at bottom most layer is 8 cm, then maximum number of small cubes that can be put at bottom most layer is 12. B: If maximum of 48 cubes can be put at second layer, then side of each cube at second layer is 6 cm. C: If side of each small cubes at third layer is 1.6 cm, then maximum number of small cubes that can be put at third layer is 300.
Parth had the cylindrical iron piece. He drilled out a conical cavity from the iron piece. The height and radius of the conical cavity is 15 cm and 8 cm respectively which is equal to the eight and radius of cylindrical iron piece. Find the total surface area of the remaining cylindrical iron piece.
If two conical pieces of wood are cut out from a cylindrical piece of wood from two ends whose radius and height are 7cm and 10cm, then find the total surface area of the remaining part where the radius of the conical part is the same as the radius of the cylinder and the height of the cone is 60% less than the height of the cylindrical part.