Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following is/are not example/s of rotary displacement pumps?

Which of the following is/are not example/s of rotary displacement pumps? Correct Answer Centrifugal pump

Rotary-type positive displacement: internal gear, screw, shuttle block, flexible vane or sliding vane, circumferential piston, and flexible impeller, helical twisted or liquid-ring pumps.

Related Questions

Consider the following advantages of rotary pumps compared to reciprocating pumps: 1. Steady discharge which increases with decrease in head 2. Suitable for handling fluids with suspended solid particles 3. Less bulky than positive displacement pumps 4. Can be started with open delivery with least load Which of the above advantages are correct?
With reference to solar water pumps, consider the following statements: 1. Solar power can be used for running surface pumps and not for submersible pumps. 2. Solar power can be used for running centrifugal pumps and not the ones with piston. Which of the statements given above is/are correct?
Two centrifugal pumps P and R are available for use in a pipe flow system and their head-discharge characteristics are as follows. Pump P Pump R Discharge (cumecs) Head (m) Discharge (cumecs) Head (m) 0 40 0 45 0.12 35 0.14 40 0.2 28 0.24 35 0.3 18 0.3 28   The following statements (S1, S2, and S3) pertain to the head and discharge values during actual operation. Neglect losses in the system. Which of the following statements are correct? S1: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 35 m. S2: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 70 m. S3: When the two pumps P and R are connected in series, the discharge is 0.3 cumecs corresponding to a head of 46 m.
Cconsider the following statements: 1. Pumps used in series are generally of the centrifugal type. 2. Centrifugal pumps, though yielding comparatively smaller discharges than axial flow pumps, yield higher heads (at each stage) compared to axial flow pumps. Which of the above statements is/are correct?
A, B and C are three small pumps fitted to a tank. D is a large pump fitted to the tank. Pump B is 25% more efficient than A. Pump C is 20% more efficient than B. Pump D is 4/3rd efficient of pump C. All of the pumps are used to fill the tank. What is the ratio of the time taken by pumps A and B to fill the tank together to the time taken by the pumps B and D to fill the tank together?
Which of the following option is true about rotary tables? Statement 1: Index is not used with optical rotary table. Statement 2: Accurate worm and gear rotary table can be used with an index plate.
Which of the following statements about airlift pumps are correct? Statement 1: In airlift pumps, the air is introduced above a liquid in pressure level and that pressure is used to discharge the liquid. Statement 2: Airlift pumps are used to convey powders in fluidized form.
Rotary vane pumps are also utilized for vacuum pumps.
A pumping station in a mine has 4 pumps, P1, P2, P3 and P4 which are connected functionally in parallel configuration as shown in the figure. The individual reliability of the pumps P1, P2, P3 and P4 are 0.80, 0.90, 0.85 and 0.95 respectively. For an effective dewatering operation in the mine denoting system success, at least three pumps should be in operation. The reliability of the system is
Mine System Engineering mcq question image
2 large and 1 small pumps can fill a water tank in 4 hours. 1 large and 3 small pumps can also fill the same water tank in 4 hours . How many hours will it take for 3 large 4 small pumps to fill the tank?