Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

S1:This weather-vane often tops a church spire, tower or high building.
P :They are only wind-vanes.
Q :Neither alone can tell us what the weather will be.
R :They are designed to point to direction from which the wind is coming.
S :Just as the barometer only tells us the pressure of air, the weather-vane tells us the direction of wind.
S6:The weather-vane can, however give us some indication of other.

The Proper sequence should be:
Statement 1: Continuous Rotary vacuum filter press has a high labor cost. Statement 2: Continuous Rotary vacuum filter press has a high clogging.
Consider the following advantages of rotary pumps compared to reciprocating pumps: 1. Steady discharge which increases with decrease in head 2. Suitable for handling fluids with suspended solid particles 3. Less bulky than positive displacement pumps 4. Can be started with open delivery with least load Which of the above advantages are correct?
A, B and C are three small pumps fitted to a tank. D is a large pump fitted to the tank. Pump B is 25% more efficient than A. Pump C is 20% more efficient than B. Pump D is 4/3rd efficient of pump C. All of the pumps are used to fill the tank. What is the ratio of the time taken by pumps A and B to fill the tank together to the time taken by the pumps B and D to fill the tank together?
Cconsider the following statements: 1. Pumps used in series are generally of the centrifugal type. 2. Centrifugal pumps, though yielding comparatively smaller discharges than axial flow pumps, yield higher heads (at each stage) compared to axial flow pumps. Which of the above statements is/are correct?
Two centrifugal pumps P and R are available for use in a pipe flow system and their head-discharge characteristics are as follows. Pump P Pump R Discharge (cumecs) Head (m) Discharge (cumecs) Head (m) 0 40 0 45 0.12 35 0.14 40 0.2 28 0.24 35 0.3 18 0.3 28   The following statements (S1, S2, and S3) pertain to the head and discharge values during actual operation. Neglect losses in the system. Which of the following statements are correct? S1: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 35 m. S2: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 70 m. S3: When the two pumps P and R are connected in series, the discharge is 0.3 cumecs corresponding to a head of 46 m.
With reference to solar water pumps, consider the following statements: 1. Solar power can be used for running surface pumps and not for submersible pumps. 2. Solar power can be used for running centrifugal pumps and not the ones with piston. Which of the statements given above is/are correct?
A jet of water is striking at the centre of a curved vane moving with a uniform velocity in the direction of jet. For the maximum efficiency, the vane velocity is ________ of the jet velocity
Which of the following methods utilises a vane mounted on the spindle of the moving system? The vane is of thin aluminium sheet and moves in a closed sector-shaped box?
Consider the following statements in connection with hydraulic turbines: 1. The Kaplan turbine is a radial flow turbine in which the guide vane angles as well as the runner vane angles are adjustable. 2. Francis and Kaplan turbines are provided with draft tubes which carry water from exit of runner to tail water to increase the gross head across the turbine. 3. The parts of turbines susceptible to cavitation are the guide vanes and runner vanes – drastically reducing the turbine efficiency. 4. The specific speed of a 4-jet Pelton turbine will be 28 if the specific speed of a single-jet Pelton turbine is 14. Which of the above statements are correct?