Bissoy.com
Doctors Medicines MCQs Q&A

The _____________ level indicator measures the static pressure represented by the head of liquid in the tank.

The _____________ level indicator measures the static pressure represented by the head of liquid in the tank. Correct Answer Pneumatic

The pneumatic level indicator measures the static pressure represented by the head of liquid in the tank. Greater the pressure; higher the level in the tank.

Related Questions

Three pipes x, y and z can fill a tank A can fill it in 4 minutes. Two pipes p and q are connected to tank B. how much time does it take for both tanks to run at the full capacity? Ratio of time taken to fill tank A by P and time taken by x to fill tank A is 2: 1 and ratio of time taken by Q to fill tank B and Z to fill tank A is 5: 3. Pipe P is 20% more efficient then pipe Q. and pipe Y takes 12 minutes to fill the tank. Capacity of tank B is 3/4 times of tank A. Note: Tank B is to be filled only after filling tank A. Valves of pipe p and q are closed once tank B is running at full capacity.
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
A tank has an optional adjustable outlet pipe that can be attached to the tank at any height we want. This outlet pipe drains water from the tank at a constant rate, while the tank is being filled using another inlet pipe at a constant rate. If the outlet, pipe is attached at half the height of the tank, the tank, which is initially empty gets filled in 18 hours. If the outlet pipe is attached at height equal to two third height of the tank, the tank, which is initially empty, is filled in 16 hours. In how many hours will the tank, which is initially empty, be completely filled if the outlet pipe is not attached to the tank?
The following question, there are three statements I, II and III. Read the question carefully and mark your answer according to which statements(s) is/are sufficient to the answer the question. What proportion of liquid of type C is there in the tank of capacity 60 liters after 2 minutes if the tank is initially empty? Statement I: Three pipes P, Q, R fill the tank in 15 minutes, 12 minutes and 10 minutes respectively Statement II: When the tank was empty all the three pipes are opened and they discharge three different types of liquid Statement III: Pipe P discharge type A liquid, pipe Q discharge type B liquid and Pipe R discharge type C liquid
Which of the following statements regarding static methods are correct?
1. Static methods are difficult to maintain, because you can not change their implementation.
2. Static methods can be called using an object reference to an object of the class in which this method is defined.
3. Static methods are always public, because they are defined at class-level.
4. Static methods do not have direct access to non-static methods which are defined inside the same class.
In a certain number system there are only two notations to represent numbers: @ and %. 0 is represented by @ and 1 by %. The subsequent numbers are represented in the following manner: 2 is represented as %@, 3 is represented as %%, 4 is represented as %@@, 5 is represented as %@% and so on. Based on this coded language, answer the following questions: What number is represented by %%@%@%%?
A U-tube manometer containing a liquid of specific gravity S measures gauge pressure of water flowing in a pipe. h2 = difference in level of manometric liquid in the two limbs h1 = height of water between point of connection of pressure tap and level of manometric liquid in the limb to which it is connected by a tube bending down. The measured gauge pressure is:
A, B and C are 3 small pumps fitted to a tank. D is a large pump fitted to the tank. B is 50% more efficient than A. C is 33.33% more efficient than B. D is 50% more efficient than C. All of the pumps are used to fill the tank. Find the ratio of the time taken by all the pumps to fill the tank when pump D is used to empty the tank and other are used to fill the tank to the time taken when all are used to fill the tank?