Bissoy.com
Doctors Medicines MCQs Q&A

The cleaning of the endoscope is done with ____________ i) 2% Glutarldehyde (CIDEX) ii) Sodium Hypochlorite iii) Hydrochloric acid iv) Iodophor (Betadine-providone) v) 1% Saline Solution vi) 70% ethyl or isopropyl alcohol vii) Ethylene oxide (ETO) viii) Formaldehyde vapour ix) Phenol Solution x) Vinegar

The cleaning of the endoscope is done with ____________ i) 2% Glutarldehyde (CIDEX) ii) Sodium Hypochlorite iii) Hydrochloric acid iv) Iodophor (Betadine-providone) v) 1% Saline Solution vi) 70% ethyl or isopropyl alcohol vii) Ethylene oxide (ETO) viii) Formaldehyde vapour ix) Phenol Solution x) Vinegar Correct Answer i,iv, vi, vii, viii

The body of an endoscope is flexible because it is made of polymers. The cleaning agents used need to be harsh enough for the microbes that may get attached to the endoscope as it is examining the patient but they should not corrode or harm the body of the endoscope.

Related Questions

Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid
Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?
Reaction between which of the following will NOT lead to the evolution of Hydrogen gas? (A) Magnesium with dilute hydrochloric acid (B) Copper with dilute hydrochloric acid (C) Sulphur powder with dilute hydrochloric acid (D) Aluminium with dilute hydrochloric acid
Which of the following statements are correct? A. Sugarcane juice is fermented to form vinegar. B. Vinegar has acetic acid. C. Benzoic acid is the acid present in Vinegar. D. Vinegar is used as a preservative.
Bottle A contains 100 ml of 20% saline solution, while bottle B contains 40 ml of 40% saline solution. 10 ml of water is accidently added to the bottle B. What amount of solution from bottle A should be poured in Bottle B to obtain a 25% saline solution?
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
A bar tender replaces some quantity of alcohol having 40% concentration with water and thus the concentration of alcohol changes to 30%. If the alcohol which he replaced is mixed with another sample of 260 ml alcohol having 20% concentration, then a mixture having 27% concentration of alcohol is prepared. Find the initial quantity of alcohol having 40% concentration.
While preparing an alcohol-water solution with 30% alcohol, accidently, more alcohol was mixed, and a solution containing 40% alcohol was made. How much water should be added in 20 litres of the prepared solution to obtain the desired solution?
A jar contains alcohol solution in which there is 120 liters of alcohol, The ratio of alcohol and water is 8 : 3. If 55 liters of this solution is taken out and 18 liters of water is added to the resultant solution then what is the percentage of water in the final solution out of the alcohol initially present?
The following questions have three statements. Study the question and the statements and decide which of the statement(s) is/are necessary to answer the question. A diluted alcohol solution has 8 litres of alcohol and the rest is water. Find the amount of this solution which should be replaced with pure alcohol. Statement I: A new solution which has 30% alcohol concentration is to be formed. Statement II: The amount of final mixture is 40 litres. Statement III: The amount of water in the initial mixture was 32 litres.