Bissoy.com
Doctors Medicines MCQs Q&A

Refer to Q3, Q4 and Q5 estimate what is the adiabatic temperature rise for this reactor and what is its significance? Using the equation:

Refer to Q3, Q4 and Q5 estimate what is the adiabatic temperature rise for this reactor and what is its significance? Using the equation: Correct Answer 250 K

The maximum temperature rise corresponds to complete conversion of the reactants and can be computed from the given data The adiabatic temperature rise indicates the potential danger of a coolant system failure. In this case the reactants contain enough internal energy to raise the reactor temperature by 250 K.

Related Questions

Match the column. a. Detailed estimate 1. Estimate of additional works during the process b. Supplementary estimate 2. Prepared for approx. rates initially c. Revised estimate 3. Includes details and cost of everything d. Rough estimate 4. Prepared when the costs exceed more than 5%
What is the correct sequence of preparing an estimate? 1. Detailed estimate 2. Approximate estimate 3. Supplementary estimate 4. Revised estimate
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise -fall periods and rise and fall periods should be same. The maximum rise in follower is 30 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 45 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 55 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within first half of cam profile, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 35 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
Consider the following statements and choose the correct answer:
1. A direct proportionality exists between vapour pressure and the concentration of water vapour in the atmosphere
2. Relative humidity is an expression of the ratio of the actual vapour pressure of the atmosphere when saturated at the same temperature
3. A rise or fall in temperature with no change in vapour pressure will cause a drop or rise, respectively, in relative humidity
4. A rise or fall in vapour pressure with no change in temperature will be accompanied by a rise or fall, respectively, in relative humidity
An irreversible aqueous phase reaction, A + B → P, is carried out in an adiabatic mixed flow reactor. A feed containing 4 kmole/m3 of each A and B enters the reactor at 8 m3/hr. If the temperature of the exit stream is never to exceed 390 K, what is the maximum inlet feed temperature allowed?
(Data: Heat of reaction = -50 kJ/mole, Density of the reacting mixture = 1000 kg/m3, Specific heat of reacting mixture = 2 kJ/kg.K)
The above data can be assumed to be independent of temperature and composition.
The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3/s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = -50000 kJ/kmole of A reacted Heat capacities CPA = CPB = 100 kJ/kmole. K (may be assumed to be independent of temperature))